How-To prep before topside primer.
Автор: How-To Marine Products
Загружено: 2024-01-09
Просмотров: 122
Описание:
FB MARKETPLACE MISTAKE! Part 4 - Back on the budget build, after the transom repair, it was time to start prepping for paint.
I started out with 320 grit sand paper and it didn't scratch the surface, moved to 240 and made a little more progress but landed at 120. Usually you wouldn't drop that far down to topside paint but I didn't have any other choice with the poor brush application of the previous coating.
After the entire hull was sanded with 120 grit sandpaper using the dustless Mirka and shop-vac, blew off the boat with compressed air, the cap rail was taped off and then the entire boat wiped down with Pettit 120 Brushing Thinner to remove any remaining residue.
0:00 - Sanding the port side
1:33 - Sanding the transom
1:55 - Sanding the starboard side
3:22 - Blowing off the hull with compressor
3:44 - Taping off the cap rail
4:32 - Solvent wiping the hull with Pettit 120 Brushing Thinner
Please LIKE and please SUBSCRIBE if you liked the video or found it helpful. I'll see ya on the next one!
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке:
