Radius Turning Tool - part 3

Описание: This is part 3 of of this 5-part mini-series. The reasons for making this are summarised in part 1. It is now clear that this will be in a four-part series. The turn-table is completed and the bracket is started in this video. The overall shape of the tool is now apparent. Most of the work in this video is undertaken on the mill.

00:00 Review and need to modify the split nut
01:12 Setting up split nut on mill table and drilling hole
02:15 Setting up split nut in machine vice to extend slot
03:14 Access hole for screw in split nut
04:55 Trial assembly of split nut, table, and base looking for correct clearance
06:14 Description of bracket
06:50 Profiling top of bracket in mill
07:39 Cutting slot in bracket
08:48 Spot facing and drilling for two screws on the mill and drill
10:21 Drilling and tapping for the M5 hold down bolt
10:52 Profiling tapered front face on mill - not merely cosmetic!
11:11 Removing excess stock in bandsaw
11:32 Machining seating face of bracket
12:31 Description of updated location of bracket on table
13:33 Marking out for machining slot and careful set up to avoid mistakes
16:16 Machining slot
18:20 Transferring tapping drill positions to table
19:34 Review and coming up...