XL5 WITH OPTION PACKS

Описание: This great bundle takes the baseline 43MC732 XL5+ Power Bender and adds even more capability to make this not only a universal metal bender but an indispensable and versatile bit of fabrication equipment and/or comprehensive wrought iron workers machine.
As well as being a metal bending tool, a guillotine for metal, a bar roller, a hole punch and a cold riveting tool, the extra options provide a sturdy floor mount pedestal, attachments for embossing and end forging of bars, an edge bender to bend steel on edge, a micro bender for tight and intricate bends. Last but not least there is an option pack for rolling round tube and rod. For the money, you will be hard pressed to find a piece of fabrication equipment that is so versatile.

Specifications
-Dimensions: W: 110 x D: 430 x H: 360 x 720mm handle length
Punching - packs a mean punch with a reversible punch block capable of 5mm and 6mm dia holes in 5mm/6mm flat bar respectively. Now includes for 2017 the 3mm and 4mm punch block and pins.

-Profile specifications: maximium 5mm diameter in 5mm thick material or 6mm diameter in 6mm thick material (with dual block & pin supplied)
Shearing - cuts like a hot knife through butter for all of these sizes. Note the separate blade aperture for cutting round and square bar.

-Profile specifications: 25 x 8mm to 40x 6mm flat strip - 10mm square bar & 12mm round bar
Riveting - Produces strong authentic looking ornamental joints using cold rivets. A useful alternative to welding when availability of welding equipment or power is an issue.

-Profile specifications: will work with 3, 5 & 6mm rivets (flat or round head)
Rolling - rolls arches, curves and rings in flat and square bars by driving steel backwards and forwards through rollers using the winding handle. (note - be aware that the knurled drive roller can leave a "knurl" pattern impression on the face of the steel bar being rolled)

Bending (single pass) - real power bending completed in a single pull of a lever. Bends upto 60° angles in material sizes up to 12mm thick. Bends upto 90° angles in material beyond 12mm and upto 16mm thick.

-Profile specifications: 25 x 10 to 40 x 8mm flat bar - 16mm square & round bar
Bending (progressive) - an extra feature for gradual bending of even bigger sections into curves. Carried out by applying large bending power at increments along the length of a bar. Handles a wide variety of sections including angle, T-section, square tube, square bar and channel, and even handrail profile.

-Profile specifications: 50 x 10 to 40 x 8mm flat bar - 20mm square (16mm if bent diagonally) - 20mm round bar
Max 30 x 30 x 1.5 (wall thickness) to 25 x 25 x 2 (wall thickness) square tube

-Max 30 x 30 x 3 (thick) to 25 x 25 x 6 (thick) angle

-Max 30 x 30 x 3 (thick) to 25 x 25 x 5 thick T-section

-Max 40 x 5 to 25 x 10 flat bar on edge

*Please note: The maximum working capacity is for hot rolled mild steel bar and annealed bright mild steel bar. Working beyond these limits or with material of greater hardness may reduce the operational life of the machines.

https://www.fhbrundle.co.uk/products/...