05_1973 Mustang 2100 Carburetor Reassembly, Choke Fast Idle, & Throttle Position Solenoid (TPS)

Описание: In this video (5 of 8) the 2100 Carburetor is reassembled, the Choke Fast Idle Speed system is shown, and the Throttle Position Solenoid (TPS) is shown as well.

===============================================================
Digital Amp Clamp Volt/Ohmmeter, search on the following string to see several models to choose from:
KAIWEETS Digital Clamp Meter Multimeter ===============================================================


1. 01_1973Mustang-ChrisB_2100CarbOverview-PowerValve_20251217.mp4
a. YouTube link:    • 01_2100 Carburetor Overview Power Valve Pr...  
b. YouTube name: 01_2100 Carburetor Overview Power Valve Problem
c. This video shows the initial part of taking a MotorCraft 2100 carburetor apart. It was suspected the carburetor’s Power Valve was leaking, hence the rebuild.
d. This is video #1 of 8 videos on this particular project.

2. 02_1973Mustang-ChrisB_2100CarbTeardown_20251024.mp4
a. YouTube link:    • Видео  
b. YouTube name: 02_2100 Carburetor Disassembly/Teardown
c. This video covers the disassembly of the 2100 carburetor from a 1973 Mustang's 351C engine. In one part of the video I show how the Fuel Filter was overtightened previously (41:55 mm:ss into the video), which can cause a potential fuel leak due to the Fuel Filter having previously been over-tightened into the carburetor's threaded fuel inlet. This is the 2nd of 8 videos in this series.

3. 03_ 1973Mustang-ChrisB_TestElectricChoke-TPS_TearDownCarb_20251026.mp4
a. YouTube link:    • 03  Test Electric Choke TPS Tear Down Carb  
b. YouTube name: 03 Test Electric Choke TPS Tear Down Carb
c. In this video I show how to test the 2100 carburetor Electric Choke, and disassemble the 2100 carburetor in preparation to clean and rebuild. This is the 3rd of 8 videos in this series.


4. 04_ 1973Mustang-ChrisB_SettingTheFloatLevel_20251026.mp4
a. YouTube link:    • 04  Setting The Float Level  
b. YouTube name: 04 Setting The Float Level
c. This is the 4th of 8 YouTube videos covering this subject. In this video I show how to set the carburetor float level.


==============================================================
THIS VIDEO 
5. 05_1973Mustang-ChrisB_1973Mustang_CarbAssemble-Float-Choke-FastIdle-TPS_20251222.mp4
a. (5 of 8) the 2100 Carburetor is reassembled, the Choke Fast Idle Speed system is shown, and the Throttle Position Solenoid (TPS) is shown as well.
b. YouTube link:    • 05_1973 Mustang 2100 Carburetor Reassembly...  
c. YouTube name: 05_1973 Mustang 2100 Carburetor Reassembly, Choke Fast Idle, & Throttle Position Solenoid (TPS)
d. ==============================================================
Digital Amp Clamp Volt/Ohmmeter, search on the following string to see several models to choose from:
e. KAIWEETS Digital Clamp Meter Multimeter ==============================================================
==============================================================


6. 06_1973Mustang ChrisBianchi DistributorBenchTestWithDrillMotorSpinningShaft v1 3FinalVersion 2025120YouTube link:
a. YouTube link:    • 06 1973 Mustang Chris B Distributor Bench ...  
b. YouTube name: 06 1973 Mustang Chris B Distributor Bench Test With Drill Motor Spinning Shaft Final Version
c. This is the 6th of 8 videos in this series. In this video I bench test the distributor from Chris’ 1973 Mustang’s 351C engine. I verify the distributor is not binding, and check the Dwell Angle of the Ignition Points with the Distributor Shaft being rotate using a Drill Motor.

7. 07_1973Mustang-ChrisB_FuelFilter_VitonO-Ring_200251102-20251223
a. YouTube link:    • 07_Fuel Filter_Viton O-Ring  
b. YouTube name: 07_Fuel Filter_Viton O-Ring
c. This is the 7th of 8 videos in this series. This video covers the use of a Viton O-Ring that is used to prevent a potential fuel leak due to the Fuel Filter having previously been over-tightened into the carburetor's threaded fuel inlet.

8. 08_1973Mustang-ChrisB_InstallingCarburetorAndDistributor_20251202
a. YouTube link:    • 08_1973 Mustang Installing Carburetor And ...  
b. YouTube name: 08_1973 Mustang Installing Carburetor And Distributor
c. This is the 8th of 8 videos in this series (final video of the 8 videos). Most of the video series covers removing, rebuilding, and reinstalling the carburetor. But, while the carb was off the engine I thought I ought to take the time to look closer than usual at the distributor, as well as making sure we did not have a Timing Chain that jumped a tooth on the Timing Gear, a Distributor Shear Pin that sheared off, or a Vibration Dampener with an outer ring that has been slipping.
d. In this clip I focused on making sure the distributor is installed properly.