E-Locker Axle Swap + Wiring How-To

Описание: Did our video help you? If so, consider buying us a beer: https://bit.ly/3feE6tJ

*PLEASE READ THIS AND THE COMMENT WE PINNED FOR HELPFUL INFORMATION*
In this video, we show you how to swap in an E-Locker rear end into your 3rd Gen Toyota 4runner. This video would also help somebody wanting to do this on their 1st Gen Tacoma because we cover procedures like the necessary wiring that would be similar for both the 4runner and Tacoma.

Seydzh was the master of this repair since he did all the research and I (Timmy) was pretty much along for the ride filming and helping where I could. There's several ways you can go about doing this job and we mention all of them in the video. The way Seydzh chose to do it is he got a full rear end and matching geared front differential from a guy who sold it to him. The guy also gave him the e-locker ecu, the switch and the necessary plugs to wire it up. This video walks you through swapping the rear end and doing the necessary wiring to make the e-locker work. We did not show swapping of the front differential because we already have another video for that right here:    • Front Differential Replacement (3rd Gen 4r...  

48:50 For getting the "RR Diff Lock" on the dash to light up, my '98 SR5 required the wire to go into pin
#8. Hope this helps someone.


*ADDITIONAL VIDEO LINKS*
YouTube only allows us to add 5 video cards to the video so we're adding the other video we wanted to link here.

*Instrument Panel Light Bulb Replacement Video
   • Instrument Panel Light bulb Replacement  

*Brake Bleed/Flush Video
   • Brake Fluid Bleed/Flush  


*OTHER HELPFUL LINKS*
If you're looking for other tools not used in this video, check out Timmy's Master Tool List.
https://www.amazon.com/shop/timmythet...

*Link to E-Locker Wiring Diagram
https://drive.google.com/file/d/1Gi7f...

*Link to Low Range Offroad Wiring Harness
http://www.lowrangeoffroad.com/ultima...

*Link to thread showing how to retrofit a non-elocker axle housing to fit an elocker 3rd member
http://www.ultimateyota.com/showthrea...

*How to solder Youtube link
   • How to Solder Wires Together (Best tips an...  


*TORQUE VALUES*
Rear Upper Control Arm Bolts/Nuts - 64 ft-lbf
Rear Lower Control Arm Bolts/Nuts - 107 ft-lbf
Lower Shock Bolts - 47 ft-lbf
Sway Bar Bracket Bolts - 14 ft-lbf
Panhard Bar Bolts/Nuts - 64 ft-lbf
Driveshaft Bolts/Nuts - 54 ft-lbf
Reat Axle Nuts - 48 ft-lbf
Wheel Lug Nuts - 85 ft-lbf


*HELPFUL TOOLS*
*Please check the comment we pinned for the list of all tools used in this video.


*PARTS*
Trailer wire (14-6) 14 gauge-6 conductor wire - Used for Wiring from the diff plug to the ECU plug
https://www.ebay.com/p/1164843735?iid...

Add a fuse ( used (2) of these)
https://amzn.to/2WPWomY

Pins for the RR lock switch (this needs to be wired for the switch to light up) - not needed for the locker to function. NEED (2) Part #82998-12170
https://www.toyotapartsdeal.com/oem/t...

Pin that goes to the dash cluster connector plug to light up the dash when the elocker is engaging/engaged Part #82998-24180
https://www.toyotapartsdeal.com/oem/t...

Marine Grade Heatshrink - has an adhesive on the inside for extra waterproof protection and strength
https://amzn.to/2UOfkQZ

Soldering Gun
https://amzn.to/2SAtZC2

Rosin Core soldering wire
https://amzn.to/2WQeXYg

**As Ebay Partner Network members, we earn commissions from qualifying purchases.
**As Amazon Associates we earn from qualifying purchases.