TriggerTech Remington 700 Triggers

Описание: In this video, Caleb walks through the TriggerTech trigger lineup for the Remington 700 and Remington 700 clones, then shows a full installation on a Remington 700 action. If you’re shopping the 700 trigger market, TriggerTech is one of the most common upgrades because it installs like a standard 700 trigger but gives you a cleaner break, adjustable pull weight, and consistent feel.

Caleb explains the three main TriggerTech grades (Primary, Special, Diamond), the two trigger shoe options (flat and curved), and what changes as you move up the line. Then he removes the factory trigger, installs the new TriggerTech, reinstalls the bolt stop parts on the factory-style action, and runs through a practical function check. He also covers pull weight adjustment, why he likes a roughly 3 lb trigger for hunting rifles, and why a trigger pull gauge is worth owning if you adjust triggers.

Chapters
00:09 TriggerTech triggers for Remington 700 and 700 clones
00:34 Primary, Special, Diamond: what the grades mean
00:58 Flat vs curved trigger shoe options
01:06 Pull weight ranges: Primary vs Special vs Diamond
01:30 Price vs pull weight: why lighter costs more
01:35 What’s in the box and why the manual matters
02:06 Unboxing: trigger, flat shoe, patch, instructions
02:53 Warranty note and why you should not “tune” a Primary into a Diamond
03:35 Getting ready: action out of the stock, bolt removed
03:48 Factory trigger removal and bolt lock parts note
04:13 Safety position tip before driving pins
04:53 Vise setup and pin tools
05:33 Drive out the rear pin and capture the bolt latch and spring
06:12 Drive out the front pin and remove the old trigger
06:34 Trigger install orientation and pin length tip
06:58 Clone note: side bolt release actions skip the bolt lock parts
07:24 Install the TriggerTech and start the front (short) pin
08:07 Install the bolt lock piece and spring orientation
09:46 Install the rear (long) pin, beveled end first
10:50 Bolt latch function check and oil note
11:14 Visual check: where the spring hooks in
11:39 Basic trigger and safety function check
12:22 Pull weight adjustment screw and direction
12:48 Setting a hunting pull weight and using the click adjustments
13:32 Trigger pull gauge recommendation
13:49 Two-stage TriggerTech adjustment locations (if applicable)
14:28 Wrap up and tech line support

Parts and items mentioned
TriggerTech Remington 700 trigger (Primary shown)
TriggerTech Special and Diamond (discussed for comparison)
Flat and curved trigger shoe options
Remington 700 action (trigger install demo)
Bolt lock / bolt release parts (latch and spring on factory-style receiver)
Bench vise with padded jaws
1/8 punch and hammer (Delrin/brass style used)
Light oil (for latch movement if needed)
Trigger pull gauge (recommended)