Pulsar Rs 200 Throttle Body And Injecter Cleaning| தமிழ் | High Mileage Trick 😉& Sensor Cleaning|JV

Описание: HI AND HELLO FRIENDS TODAY I WILL SHOW THE RS 200 THROTTLE BODY AND FUEL INJECTER CLEANING

1 . REMOVE FAIRINGS ( 4 AND 5 NO ALLENKEYS AND 8 MM AND 10 MM 12 MM SPANNERS AND SCREW DRIVERS )

2 . CARE FULLY REMOVE THE FAIRINGS ( AVOID SCREW DRIVER ANY PLIYERS )

3. REMOVE TANK FAIRINGS

4. REMOVE FUEL LINES ( USING ANY PLIERS WHEN CAREFULLY )

5. REMOVE AIR FILTER BOX SCREWS ( USING SCREW DRIVER )

6. AIR FILTER WAS VERY DIRTY COPULSARY REPLACE NEW ONE ( CHANGE AIR FILTER)

7. REMOVE THROTTLE BODY FUEL AND ELECTRIC LINES ( USING HAND OR ANY PLIERS BE CARFULLY )

8. CARFULLY REMOVE FUEL INJECTER ( HAND OR ANY PLIERS ) BE CAREFULLY

9. CAREFULLY REMOVE THROTTLE BODY ( BE SAFE )

10. THROTTLE BODY AS VERY DIRT TOO CLEAN EVERY THING ( USING ANY CARB SPRAY )

11. IM USING STB BRAND CARB SPRAY CLEANER ( STB CARB SPRAY CLEANER )

12. CLEAN THE FUEL LINES ( USING CARB SPRAY )

13. CLEAN THE FUEL INJECTER ( STP CARB SPRAY )

14 . CLEAN THE FUEL FILTER OR CHANGE WE NEED ( USING WD 40 OR ANY CLEANERS)

15. FIT THE THROTTLE BODY ( ON THIS VIDEO )

16. REPLACE A NEW ONE AIR FILTER ( CHANGE WE NEED THIS )

17. FIT THE AIR FILTER BOX CORRECT METHOD (ON THIS VIDEO)



18. FIT THE ALL FUEL AND ELECTRIC CONNECTION

19. FINALLY START THE ENGINE 😍

THANKS FOR WATCHING !!!!!!!!!!!!!!

LIKE AND SHARE !!!!!!!!!!!!!!!!!

SUBSCRIBE OUR CHANNEL !!!!!!!!!!!!!!!!!!!