3D Printed

Описание: Small Update with the E-100 now sporting LEDs for both the 75mm / 20mm Cannons, and the Headlight - The 20mm required replacing the solid ABER Barrel with some telescoped Brass Tubes for inserting a Fiber Optic through it so the LED situated inside the Turret could shine through - A method adopted from the Tamiya Models.

Documented Design and Building Process of the Model: https://imgur.com/a/a0fBDzZ

The FrSky Horus X12 Radio has now received Model specific Language Packs for the Female Announcements based on the Vehicles respective Country of Origin - E-100, Gepard 1A2, Leopard 2A7+ and King Tiger now run a German Profile with the M26 Pershing sporting an English one generated via https://ttsreader.com/

For those wondering about the "Licht Plus / Licht Minus" during the demonstration of the Light - When more than one Light Mode is being used you have to toggle through them one by one Up or Down as in you cannot go from Mode Off to Mode 3 without going through 1 and 2 first. You're essentially going one Mode Up or Down which the Manual described as + / - hence the Plus / Minus.

While not shown in the Video I've also reworked the Turret insides in preparation for a Slip Ring allowing for continuous 360° Rotation without fears of the Wiring tangling up at some point - Something I plan to add to all of my Models in the future.

00:00 - Engine On
00:16 - Turning on the Spot while rotating the Turret
00:43 - Firing the 20mm Cannon
00:47 - Raising and lowering the Cannons
01:09 - Firing the 128mm Cannon
01:15 - Firing the 75mm Cannon
01:21 - Rotating the Periscope
01:30 - Turning the Headlight On / Off
01:37 - Engine On again for a final Spin and Cannon Fire
02:14 - Turning the Model off via the Switch underneath the Engine Deck