Car wash with Xiaomi cordless pressure washer
Автор: Mohammed Asif
Загружено: 2026-02-21
Просмотров: 14
Описание:
Here is the best procedure to get a professional finish with your machine:
1. The Dry Prep
Clear the Loose Stuff: Use the 20° or 40° nozzle setting to spray down the entire car. Start from the roof and work your way down. This removes loose dust and grit that could scratch the paint if you started scrubbing immediately.
Wheel Check: Hit the wheel arches and rims first. Since the Xiaomi unit is portable, you can get into the tight angles of the alloys easily.
2. The Foam Stage
Fill the Dispenser: Fill the integrated foam pot with a dedicated car shampoo or "snow foam" concentrate.
Apply Bottom-to-Top: Set the nozzle to Foam Mode. Contrary to rinsing, apply the foam from the bottom of the car upwards. This allows the soap to cling longer to the dirtiest parts without being diluted by runoff from above.
Dwell Time: Let it sit for 2–3 minutes (don't let it dry!). This breaks down the static bond of the dirt.
3. The Rinse
Switch Nozzles: Rotate the head to the 20° High-Pressure setting.
Top-to-Bottom: This time, start from the roof. The 20° setting provides the most concentrated "knife" of water to slice through the loosened grime.
Pro Tip: If you're using a bucket as your water source, ensure the filter is weighted down so it doesn't float to the surface and suck in air mid-rinse.
4. The Two-Bucket Method (Optional but Recommended)
If the car is still filmed with "traffic film" (that thin layer of gray grime):
Use a microfiber wash mitt and a bucket of soapy water to gently wipe the surfaces.
Rinse the mitt in a second bucket of plain water after every panel to keep it clean.
5. Final Rinse & Drying
Spot-Free Finish: Use the 40° or "Shower" mode for a final gentle flood of the car. This helps the water sheet off rather than bead up, which makes drying easier.
Dry Immediately: Use a large microfiber drying towel. Since Bengaluru's sun can be quite strong, drying quickly prevents those pesky white water spots from forming.
Battery Management Note
The battery typically lasts about 15–20 minutes on high pressure. If you have a larger SUV, I’d recommend being quick with the rinse stages to ensure you don't run out of juice halfway through!
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке: