OLYMPIA V-40 CNC VERTICAL TURNING CENTER

Описание: http://www.wigglesworth.com

OLYMPIA V-40 CNC VERTICAL TURNING CENTER

NEW 1999
4650 CUTTING HOURS

SPECIFICATIONS:

TABLE DIAMETER...... 46"
MAX TURNING DIAMETER.... 57.1"
MAX SWING......... 57.1"
MAX WORKPIECE HEIGHT:
UNDER RAIL........ 43.3"
UNDER TOOL BLOCK...... 31.5"
MAXIMUMUM WORKPIECE WEIGHT.. 15,400 LBS
RAM TRAVEL (Z-AXIS)..... 31.5"
HEAD TRAVEL (X-AXIS).... -3.9/+35.4"
RAM SIZE........ 8.27 x 8.27"

MAIN MOTOR, AC:
HORSEPOWER........ 54 HP
TABLE SPEEDS........ 1 - 700 RPM

AXIS FEED RATES:
INFINITELY VARIABLE..... 0 - 197 IPM
RAPID......... 394 IPM

APPROX. MACHINE DIMENSIONS.. 165" X 152" X 193.1"
APPROX. WEIGHT...... 41,850 LBS

FEATURES & EQUIPMENT:

FEED MOTORS, FANUC AC WITH DIGITAL DRIVES NORTH AMERICAN ELECTRICAL SYSTEM AUTOMATIC TOOLCHANGER, 10 TOOLS 4-JAW FACEPLATE-TYPE CHUCK NORTH AMERICAN

HYDRAULIC SYSTEM TRANSFORMER CHIP CONVEYOR AND GUARDING ALL AVAILABLE TOOLING

CNC CONTROL:
FANUC 18I-TA 2-AXIS CNC CONTROL
COMPLETE WITH ALL STANDARD FEATURES AND INCLUDING THESE OPTIONAL
SPECIFICATIONS:
320 M PART PROGRAM STORAGE
MANUAL PULSE GENERATOR, REMOTE MOUNT
TOOL GEOMETRY AND WEAR COMPENSATION
CUSTOM MACRO

"AS IS, WHERE IS"

GENERAL CONSTRUCTION: THE BEARING SURFACES OF THE MACHINE ARE TURCITE AND BRONZE ON HARDENED STEEL WAYS. THE CROSSRAIL IS FIXED ON THE COLUMN AND

INCORPORATES THE RAM HEAD, WHICH TRAVELS ALONG THE CROSSRAIL WAYS. THE AUTOMATIC TOOL-CHANGER LOCATED AT THE RIGHT END OF THE CROSSRAIL AND HAS A FULL

ENCOLSURE. THE CUTTING AREA OF THE MACHINE IS FULLY ENCLOSED BY STEEL COVERS AND COOLANT RETURN. CHIP DISPOSAL IS CONVENIENTLY LOCATED ON THE RIGHT SIDE OF

THE MACHINE. A SEPERATE CHIP TOTE EXTRICATES THE CHIP TO AN APPROPRIATE DISPOSAL BIN.

1. POLYMER CASTING:
*10x BETTER VIBRATION DAMPENING
*HEAVIER CUTTING
*IMPROVED SURFACE FINISH
*HIGHER ACCURACY
*FASTER MACHINING SPEEDS
*PROLONGED TOOL LIFE
2. TABLE SECTION: THE TABLE IS CONSTRUCTED WITH A STATE OF THE ART TIMKEN CROSS-ROLLER BEARING.

3. RAM: 11,240 LBS OF CUTTING FORCE IS ACCOMPLISHED THROUGH HARDENED BOX WAYS ON THE CROSSRAIL. THE RAM IS CONSTRUCTED OF FORGED STEEL AND IS 210 MM

SQUARE. THE RAM TRAVELS IN FULLY ENCLOSED BRONZE BEARING SURFACES ALONG FOUR HARDENED AND GROUND GUIDEWAYS. VERTICAL RAM MOTION IS PREFORMED MAKING USE OF

AN 80 MM DIAMETER PRELOADED BALL-SCREW, DRIVEN BY A FANCU AC SERVO MOTOR WITH A 2 TO 1 REDUCTION GEARBOX.

4. 10 POSITION TOOLCHANGER: TOOLS ARE PROTECTED IN THE CARROUSEL BY A STEEL COVER WITH A RETRACTABLE DOOR AND AIRBLAST.

T.R. Wigglesworth Machinery Company
7100B Krick Road
Bedford, Ohio 44146
Phone: (440) 232-6660
Fax: (440)232-5541
[email protected]
http://www.wigglesworth.com