2001 Mr2-S Valve Cover Gasket Replacement
Автор: DIY AutoWerks
Загружено: 2020-06-04
Просмотров: 2501
Описание:
Hey everyone, back again with another job!
Today we are replacing the valve cover gasket and spark plug o-rings on a sw30 mr2 Spyder.
Tools I used:
10mm socket
12mm deep socket
Spark plug socket
1/4in socket wrench
1/4in torque wrench
*Permatex gasket maker (this goes on the front and back of where the cover mates with the timing chain cover)
Needle nose pliers
Flashlight
Screwdriver
Total job time: 2 Hours
The bolts in this job need to be torqued correctly so here are the specs:
Valve cover bolts: 8ft/lbs
2 center bolts on valve cover: 80in/lbs
Ignition coil bolts: 7ft/lbs
Sorry for the few mistakes I made in the video, it was super hot that day and I was in a rush to get this job done! I tried to correct all my mistakes in the video but if I missed anything let me know in the comments! I'm still new to making these videos so please understand!
----------------------------------------------------------
Some helpful links:
https://www.spyderchat.com/
https://www.spyderchat.com/threads/to...
https://www.spyderchat.com/threads/va...
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке:
