Blue acetal drilled and bored for bearing. Bearing pressed in and Circlip installed
Автор: smallcnclathes
Загружено: 2023-05-06
Просмотров: 1597
Описание: At 58 Outside Diameter these rollers are far too big for my small cnc lathe and they are right at the limit for my manual lathe without using the reverse jaws. So they had to be half parted off then cut through with a hand saw. I have nothing else to cut them off. Used a blank size that let me make multiple rollers from the blank. Drilled 31.5 and bored all the way through at 42 then bored to 47 for the bearing. Cut circlip groove then pressed in the bearings and installed the circlips. A 1300/47 circlip is much stronger than I had anticipated so I did struggle a bit to install them with the pliers I have.
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке:
