How to Replace Neutral Safety Switch 2006-2010 Hummer H3

Описание: Buy Now!
New Neutral Safety Switch from 1AAuto.com https://trq.video/ib-1AZNS00739

This video shows you how to install a new neutral safety switch from TRQ on your 2006-2010 Hummer H3. The neutral safety switch is a safety device that does not let your vehicle's engine start unless the transmission is in neutral. If the switch is malfunctioning, or failed, you may not be able to start your vehicle!

Estimated installation time for a professional technician is approximately: 1 hour 0 minutes

This repair was done on a 2007 Hummer H3 X 3.7L Sport Utility 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2006 Hummer H3
2007 Hummer H3
2008 Hummer H3
2009 Hummer H3
2010 Hummer H3

Tools you will need:
• Flat Blade Screwdriver
• 13mm Socket
• 15mm Socket
• Locking Pliers
• Needle nose pliers
• Needle nose pliers
• Torque Wrench https://trq.video/ob78-1AXAA00044
• Brake Parts Cleaner
• Cloth Rags
• Gloves https://trq.video/ocLC-1AXSS00048
• Marker / Writing Utensil
• Rust Penetrant
• Safety Glasses
• Sandpaper
• Floor Jack
• Hammer
• Jack Stands
• Measuring Tape
• Wheel Chocks
• Wire Brush https://trq.video/oIS-1AXAA00079

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.