How to Replace Transfer Case Shift Motor 2006-2010 Hummer H3

Описание: Buy Now!
New Transfer Case Shift Motor from 1AAuto.com https://trq.video/ia-1AFWM00075

This video shows you how to install a new transfer case shift motor on your 2006-2010 Hummer H3. If you are experiencing problems with your vehicle’s 4 wheel drive system being able to select modes, there could be a problem with the transfer case shift motor.

Estimated installation time for a professional technician is approximately: 24 minutes

This repair was done on a 2007 Hummer H3 X 3.7L Sport Utility 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2006 Hummer H3
2007 Hummer H3
2008 Hummer H3
2009 Hummer H3
2010 Hummer H3

Tools you will need:
• 10mm Socket
• Ramps
• Trim Tool Set https://trq.video/oa6J-1AXXX00006
• Ratchet
• Socket Extensions
• Torque Wrench https://trq.video/ob6R-1AXAA00044
• Brake Parts Cleaner
• Cloth Rags
• Gloves https://trq.video/ocJm-1AXSS00048
• Safety Glasses
• Hammer
• Wire Brush https://trq.video/oIm-1AXAA00079

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.