I Saved My Drone with a 3D Printed Parachute!!

Описание: Guys in this video I have designed and tested a drone parachute. I have 3D printed its case and tested many designs before reaching the final design.
Since I was used to drone crashes during testing, this system will somewhat reduce the loss.
Do check the video guys
And don't forget to subscribe

3D Printed foldable drone video :
   • The #1 Mistake You're Making with Your DIY...  

Download files, wiring diagram, codes & parts list at the link below:
https://themechninja.com/product/dron...

Discover real DIY builds at https://themechninja.com/

🔧 DIY Drone Parachute – Component List with Buy Links

Recommended Electronics
• Node MCU – ESP8266
🔗 https://themechninja.com/product/node...
• Battery – 1S 3.7V 450 mAh
🔗 https://themechninja.com/product/1-s-...
• Boost Converter – MT3608
🔗 https://themechninja.com/product/mt-3...
• Servo Motor – SG90 180°
🔗 https://themechninja.com/product/sg-9...
• TP4056 – Li-ion Charging Module
🔗 https://themechninja.com/product/tp4056/
• Small Rocker Switch – ON/OFF
🔗 https://themechninja.com/product/rock...
• Accelerometer Sensor – ADXL345 (3-Axis Digital)
🔗 https://themechninja.com/product/3-ax...

Necessary Accessories
• Parachute – Minimum 80cm diffuser umbrella
• 3D Printer – 220×220×250 mm build volume
• Nuts & Bolts – M3 size (various lengths)
• Rubber Bands, Nylon Thread, Heat Shrink Tube, Soldering Iron

Thank you for watching and don't forget to subscribe :)