How I 3D Printed a Foldable Hexacopter

Описание: This is Y6 Hexacopter design which is completely 3D Printable. The best part of this design is that it has foldable arms and is easy to carry
This drone has a 2-axis gimbal that can mount an ordinary Raspberry Pi camera
It has a weight of 1400 grams excluding the battery weight

Download files, wiring diagram, & parts list at the link below:
https://themechninja.com/product/y6-h...

Discover real DIY builds at https://themechninja.com/

🔧 Y6 Hexacopter – Component List with Buy Links

Recommended Electronics
• Motor ×6 – A2212 1000KV
🔗 https://themechninja.com/product/a221...
• Motor ×6 – A2212 1400KV
🔗 https://themechninja.com/product/a221...
• Propeller ×3 pairs – 8038 (8×3.8)
🔗 https://themechninja.com/product/8038...
• Propeller ×3 pairs – 8045 (8×4.5)
🔗 https://themechninja.com/product/8-x4...
• Propeller ×3 pairs – 1045 (10×4.5)
🔗 https://themechninja.com/product/10x4...
• ESC ×6 – ReadyToSky 40A
🔗 https://themechninja.com/product/read...
• ESC ×6 – Hobbywing Skywalker 40A
🔗 https://themechninja.com/product/hobb...
• Flight Controller – Radiolink Pixhawk
🔗 https://themechninja.com/product/radi...
• Flight Controller – CUAV NANO 7
🔗 https://themechninja.com/product/cuav...
• Transmitter & Receiver – 10CH FS-i6S
🔗 https://themechninja.com/product/10-c...
• Power Distribution Board – 100A
🔗 https://themechninja.com/product/100-...
• Power Distribution Board – Matek PDB
🔗 https://themechninja.com/product/mate...
• Battery – 3S 11.1V 8000mAh
🔗 https://themechninja.com/product/3s-l...
• Battery Charger – SkyRC B6 Neo
🔗 https://themechninja.com/product/sky-...
• Battery Charger – Imax B6
🔗 https://themechninja.com/product/i-ma...
• Battery Charger – Imax B3 Pro (2S/3S)
🔗 https://themechninja.com/product/imax...

Additional Electronics
• GPS & Compass – Ublox Neo7
🔗 https://themechninja.com/product/ublo...
• GPS & Compass – CUAV C Compass
🔗 https://themechninja.com/product/cuav...
• Telemetry – 915MHz
🔗 https://themechninja.com/product/915m...
• Power Module – CUAV CAN PMU 110A 62V
🔗 https://themechninja.com/product/cuav...
• Power Module – CUAV 60A
🔗 https://themechninja.com/product/cuav...
• Power Module – Hollybro
🔗 https://themechninja.com/product/holy...
• Power Module – Pixhawk 90A
🔗 https://themechninja.com/product/pixh...
• Servo Motor ×2 – SG90 180°
🔗 https://themechninja.com/product/sg-9...
• Buck Converter – LM2596
🔗 https://themechninja.com/product/buck...

FPV Transmission
• Video Transmitter – Analog VTx
🔗 https://themechninja.com/product/vtx-...
• Video Receiver – Analog VTx
🔗 https://themechninja.com/product/vtx-...

OpenHD Air Unit
• Raspberry Pi – Pi Zero W
🔗 https://themechninja.com/product/pi-z...
• Pi Camera – 5MP
🔗 https://themechninja.com/product/pi-5...
• Camera Cable – Pi Zero Flex
🔗 https://themechninja.com/product/pi-z...
• Rocker Switch – ON/OFF
🔗 https://themechninja.com/product/rock...
• Buck Converter ×2 – LM2596
🔗 https://themechninja.com/product/buck...
• USB Connector – Female
🔗 https://themechninja.com/?s=female+usb
• SD Card – 32GB Micro SD
🔗 https://themechninja.com/product/32gb...

OpenHD Ground Unit
• Raspberry Pi – Pi 4 (4GB)
🔗 https://themechninja.com/product/rasp...
• Display – 7-Inch Waveshare
🔗 https://themechninja.com/product/wave...
• Battery Management System – 2S 20A
🔗 https://themechninja.com/product/bms-2s/
• Buck Converter – LM2596
🔗 https://themechninja.com/product/buck...
• Battery Cell ×2 – 18650
🔗 https://themechninja.com/product/1865...
• Cell Case – 2-Cell
🔗 https://themechninja.com/product/1865...
• Rocker Switch – ON/OFF
🔗 https://themechninja.com/product/rock...
• OpenHD Antenna ×2 – TP-Link AC1300 T3U Plus
🔗 https://themechninja.com/product/tp-l...
• Current Sensor – INA219 I2C
🔗 https://themechninja.com/product/ina2...
• USB Connector – Female
🔗 https://themechninja.com/?s=female+usb
• SD Card – 32GB Micro SD
🔗 https://themechninja.com/product/32gb...

Necessary Accessories
• 3D Printer – 220×220×250 mm build volume
• Nuts & Bolts – M2.5 & M3 sizes, various lengths
• Tools – Cable zip tie, heat shrink tube, soldering iron

Thank you for watching guys,
Don't forget to subscribe