How to Replace Front Sway Bar, Bushings, & Links 2007-2009 Saturn Aura

Описание: Shop for New Auto Parts at 1AAuto.com https://trq.video/c-149-dt
This video shows you how to install an entire kit of front sway bar, sway bar links, and sway bar bushings with brackets on your 2007-2009 Saturn Aura. When your sway bar has rusted or bent to the point of causing problems with your suspension, steering, or alignment, you’ll need to replace it, and likely the links and bushings as well.

This repair was done on a 2007 Saturn Aura XE 3.5L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2007 Saturn Aura
2008 Saturn Aura
2009 Saturn Aura

Tools you will need:
• Pry Bar https://trq.video/oyx-1AXAA00020
• 17mm Wrench
• 13mm Socket
• 18mm Socket
• 19mm Socket
• 21mm Socket
• Trim Tool Set https://trq.video/oFq-1AXXX00006
• Locking Pliers
• 1/2 Inch Impact Gun
• Socket Extensions
• Swivel
• Silicone Paste
• Hammer
• Jack Stands

Subscribe:    / @trq  

Check out our playlist:
Saturn Aura 2007-2009 1st Generation:    • Saturn Aura 2007-2009 1st Generation  

📱 Download the TRQ Auto Repair App for more videos, torque specifications, and car repair information: https://trq.video/appdownloadyt

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.