SRC's Hotdog Steamer Machine Instructions

Описание: Questions? Please call SRC at 530-272-2266 or visit our website at srcparty.com.

How to operate the SRC Hotdog Steamer Machine step by step.

• Open up lower door and slide the two trays out
• Fill water to top of tray (roughly 3-6 qt. no more) (The use of hot water will reduce pre-heat time).
• Place Hot Dogs in LONGWAYS & Heat for 1-1.5 hours  (Ok to put hot dogs in during pre-heat, takes about 30 minutes to cook after machine is hot) 
• Plug the machine in and turn control knob to HIGH to Pre-Heat Machine 
• Once steam is generated, set the control knob to in the center of the range between HIGH and LOW for normal operation. 
• Place Hot Dogs in LONGWAYS & Heat for 1-1.5 hours  (Ok to put hot dogs in during pre-heat, takes about 30 minutes to cook after machine is hot)
• Rotate done Hot Dogs to front row and place cold ones in back to speed process 

****WARNING: DO NOT ALLOW THE MACHINE TO BOIL DRY.  CHECK REGULARLY TO BE SURE THERE IS ENOUGH WATER IN BOTTOM OF TRAY.****
Damage will occur and you will be charged for replacing the unit

****Place buns into the wire rack in 2 to 5 minutes before dogs are done and no earlier because if the buns are left in machine for a long period of time they will become soggy.

When you are done using the machine, make sure you empty out the machine of any unused buns and hot dogs and drain the water out before returning the machine.

There is a drain plug that you will unscrew to drain leftover water.

You do not have to clean the machine before you return it back to us. We clean and test the machine after every use.

Allow 1 - 1.5 hours prep time for hot dogs to be ready to serve

* Do not steam anything other than hot dogs in this machine. If fish or other food is steamed in the unit, extra cleaning charges will be applied*

To download the Hot Dog Steamer Instructions go to http://www.srcparty.com/srcwp/wp-cont...