Exhaust smoking Valve stem seal replacement with a rope Honda

Описание: Exhaust smoking Valve stem seal replacement with a rope Honda
Part 3:My Honda Accord (civic) 1992, CB7, In this part, I show you how to use a rope to keep the valve while we are changing the seal. Then I reassemble the camshaft bolts, rocker arms, tighten bolts to specs from manufacture.
Turn the crankshaft with 19mm wrench to pull piston No.1 down.
Put a rope inside cylinder No.1.
Then turn the crankshaft to push the piston up, the rope will hold the valves while I replace valve stem seals.
Use the spring compressor and the adapter to remove the spring and remove the split keys with magnetic metal picker.
Take the valve stem seals out with a nipper, shaking back and forth until the seals go out.
Replace with new stem seal lubricate it with engine oil.
Assemble valve spring, split keys again. Remove the rope.
Turn the crankshaft to TCD before assemble camshaft bolts, rocker arms.
Tighten camshaft bolts to specs shown in the sevice manual, 12Nm for 6mm bolts, and 22Nm for 8mm bolts with tightening sequence and a torque wench.
Test camshaft, rocker arms and stem valve seals by turning the crankshaft somre revolutions with 19mm wrench.

subscribe:    / @lecongtri5113  
youtube:    / @lecongtri5113  
facebook:   / tri.lecong.148116  

How to replace brake pad for your motorbike Honda    • How to replace brake pads for your motorcy...  
How to change engine oil for your motorbike Honda    • How to change engine oil for your motorcyc...  
Honda Accord engine start and warm up    • Honda Accord engine start and warm up  
Change engine oil Honda accord at home    • Change engine oil Honda accord at home  
How to perform a compression test at home Honda accord civic    • How to perform a compression test at home ...  
How to set ignition timing at home Honda accord    • How to set ignition timing at home Honda  
Exhaust smoking - valve stem seal replacement Honda    • Exhaust smoking Remove valve cover gasket ...