How to replace the Rear Axle Bearing and Seals 2014 - 2019 Chevrolet Silverado 🚗

Описание: Find the parts used in the video on CarParts.com just there https://carparts.solutions/SILVERADO
Over 1 million auto parts at your fingertips, download our app 🤖 https://carparts.solutions/AppGooglePlay or 🍎 https://carparts.solutions/AppIOS

⚙️ NEEDED CARPARTS AND PRODUCTS
Differential fluid: https://carparts.solutions/Differenti...

Multi-purpose grease

Penetrating oil: https://carparts.solutions/Penetratin...

Rear axle bearing: https://carparts.solutions/RearAxleBe...

Rear axle seal: https://carparts.solutions/RearAxleSe...

Brake cleaner: https://carparts.solutions/BrakeCleaner

💪 TIGHTENING TORQUES
Pinion shaft lock bolt : 27 Ft-lbs

Differential cover bolts: 30 Ft-lbs

Differential’s filler cap: 24 Ft-lbs

ABS sensor holding bolt: 156 In-lbs

Brake caliper mount bolts: 170 Ft-lbs

Slide pin: 38 Ft-lbs

Wheel lug nuts: 140 Ft-lbs

🛠 TOOLS
The toolbox recommended by CARPARTS.COM to repair your Chevrolet Silverado: https://carparts.solutions/ToolBox

List of the tools we used to replace the Rear Axle Bearing and Seals on a Chevrolet Silverado:
Hydraulic jack: https://carparts.solutions/FloorJack
Jack stands: https://carparts.solutions/JackStands
10 mm wrench
Bearing removal tool
Fork
Magnetic extender
Slide hammer
Sledgehammer
Wheel lug wrench
Bearing installation tool
Heat gun
Milling cutter
Torque wrench: 20 to 250 Ft-lbs https://carparts.solutions/TorqueWren... 100 to 600 Ft-lbs https://carparts.solutions/TorqueWren...
Ratchet
Flat head screwdriver
Torx T15 screwdriver
10 mm socket
Torx T30 socket
Lineman's pliers
Fluid container
Hammer
3/8" drive extension socket
Cloth
Paper towels
Sandpaper
Oil syringe
Vacuum

Don't forget to subscribe:    / @carpartscomofficial  

🛻 COMPATIBLE VEHICLES
The operation and tools displayed in the video should be available on the following vehicles :
2014 Chevrolet Silverado
2015 Chevrolet Silverado
2016 Chevrolet Silverado
2017 Chevrolet Silverado
2018 Chevrolet Silverado
2019 Chevrolet Silverado

📽 🛠 USEFUL VIDEOS 🛠 📽
How to jack your 2014 - 2019 Chevrolet Silverado safely? ⬆ 🚗 :    • How to jack your 2014 - 2019 Chevrolet Sil...  

How to replace the Rear Brakes 2014 - 2019 Chevrolet Silverado 🚗 :    • How to replace the Rear Brakes 2014 - 2019...  

⚠️ CARPARTS.COM'S INFOS
In order to remove the rear axle shaft, you need to disengage it from the differential.

Before replacing the differential cover, you need to clean the seal surface to ensure a perfect seal.

Before fitting the rear axle bearing back on, you must clean the seal surface to ensure it is completely impermeable.

Attention! The bearing must be inserted properly. Ensure that you are inserting the side of the bearing that is more rounded on the differential side.


🚨 DISCLAIMER
This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area.

📚 CHAPTERS
0.00 Intro + how to jack your Silverado
0.19 Remove the rear brake system
0.26 Remove the axle shaft
3:30 Remove the rear axle seal
0.04 Remove the rear axle bearing
4:38 Clean the seal surface
4:58 Put the rear axle bearing back
5:32 Put the rear axle seal back
5:52 Put the axle shaft and differential cover back + tightening torques
8:52 Put the rear brake system back
9:37 Add differential fluid back + tightening torques