How to replace the Front Brake Calipers 2019 - 2025 RAM 1500 🚗

Описание: Find the parts used in the video on CarParts.com just there https://carparts.solutions/RAM1500Gen5
Over 1 million auto parts at your fingertips, download our app 🤖 https://carparts.solutions/AppGooglePlay or 🍎 https://carparts.solutions/AppIOS

⚙️ NEEDED CARPARTS AND PRODUCTS
Brake pads: https://carparts.solutions/FrontBrake...

Threadlocker: https://carparts.solutions/Threadlocker

Brake caliper: https://carparts.solutions/FrontBrake...

Brake cleaner: https://carparts.solutions/BrakeCleaner

💪 TIGHTENING TORQUES
Brake caliper mount bolts: 130 Ft-lbs

Slide pin: 31 Ft-lbs

Banjo bolt: 30 Ft-lbs

Wheel lug nuts: 130 Ft-lbs

🛠 TOOLS
The toolbox recommended by CARPARTS.COM to repair your RAM 1500: https://carparts.solutions/ToolBox

List of the tools we used to replace the Front Brake Calipers on a RAM 1500 :
Hydraulic jack: https://carparts.solutions/FloorJack
Jack stands: https://carparts.solutions/JackStands
Adjustable wrench
Banjo shutter pliers
Wheel lug wrench
Torque wrench: 20 to 250 Ft-lbs https://carparts.solutions/TorqueWren... 100 to 600 Ft-lbs https://carparts.solutions/TorqueWren...
Ratchet
Flat head screwdriver
15 mm socket
16 mm socket
17 mm socket
21 mm socket
Fluid container
Hammer
Wire brush
Paper towels

Don't forget to subscribe:    / @carpartscomofficial  

🛻 COMPATIBLE VEHICLES
The operation and tools displayed in the video should be available on the following vehicles :
2019 RAM 1500
2020 RAM 1500
2021 RAM 1500
2022 RAM 1500
2023 RAM 1500
2024 RAM 1500
2025 RAM 1500

📽 🛠 USEFUL VIDEOS 🛠 📽
How to jack your 2019 - 2025 RAM 1500 safely? ⬆ 🚗 :    • How to jack your 2019 - 2025 RAM 1500 safe...  

How to Bleed the Brake Fluid System 2019 - 2025 Ram 1500 🚗 :

⚠️ CARPARTS.COM'S INFOS
Here’s a tip! You can limit brake fluid leakage during this operation by plugging both sides of the banjo bolt with banjo shutter pliers.

When replacing a brake caliper, you need to bleed the brake fluid system to remove air from the system.

Once the operation is completed, you'll need pump slowly on the brake pedal a few times until feeling a strong resistance from the pedal. The aim being to bring the brake pads closer to one other.

🚨 DISCLAIMER
This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area.

📚 CHAPTERS
0:00 Intro + how to pull up your RAM 1500
0:21 Slightly retract the pistons
0:47 Loosen the banjo bolt
1:16 Remove the caliper from the mount
1:54 Remove the caliper mount
2:29 Put the brake caliper mount back + tightening torque
3:47 Put the brake pads back
4:27 Put the brake caliper back + tightening torque
5:11 Screw the brake hose back + tightening torque
6:06 Bleed the brake fluid system
6:18 Clean the brakes
6:35 Put your RAM 1500 on the ground
6:47 Tips