Straightcurve® Flex Raised Garden Beds - 400 / 560 mm - 15.75/22 inch - Installation and Tips Video

Описание: This video shows the steps to install our 400mm and 560mm Flex raised garden bed panels and includes some helpful tips and pointers. Notice how easily this product will hold a line and connect together. We really have made this super easy for you to install yourself!

www.straightcurve.com

0:00 INSTALLATION
0:05 Step 1: Mark edge line on ground and layout edge pieces nearby.
0:22 Step 2: Place first two edges front face down on the ground with ends touching and with join slots aligned.
0:31 Step 3: Join using the joining set, break the pieces apart first by hand and insert join bracket (A) securely under the top lip (centred). Press it against back of panels (use a metal hammer to firmly lock in).
1:03 Step 4: Next, insert a slider (B) through adjacent bottom slots with it’s ‘feet’ against the edge. Knock it through fully so wedge (C) can insert and lock in the slider.
1:16 Step 5: Hammer the wedge in firmly. Repeat step 4 for middle and top slot using the remaining wedge and slider sets
1:52 Step 6: Set these two edges upright and flex to position where desired, use fixing spikes as temporary placeholders.
2:10 Step 7: Introduce and join further lengths (or joined pairs of lengths), butting them against the now standing edge, connecting them as you go
2:20 Step 8: Check the line, then hammer all fixing spikes (5 per length) through foot tab holes
2:33 Step 9A: Using the Universal bracing set, hammer in the anchoring stake and connect to bracing rib with chain and turn buckle
3:05 Step 9B: Alternatively brace with ground anchoring post-1100mm. These post are installed tightly against a bracing rib and close against the bottom foot.
3:37 Step 9B: Screw the ground anchor post to the bracing ribs with tek screw through the guideholes
4:00 Step 11: Back fill your Raised Garden Bed to finish

4:05 MAKE YOUR OWN CORNER
5:19 END RESULT