2013 NISSAN Armada - Audio System with Navigation
Автор: Nissan Owner Channel
Загружено: 2015-04-19
Просмотров: 18199
Описание:
Audio System with Navigation (if so equipped)
Press the VOLUME/ON-OFF control knob to turn your system ON or OFF. Turn the knob to adjust volume.
Your radio will play FM and AM stations, and if so equipped, it will tune in SiriusXM® Satellite radio. Choose a radio band by pressing the AM/FM button or, if so equipped, the XM button. For full details on SiriusXM® Satellite Radio, you can refer to your Owner's Manual or go to www.siriusxm.com.
To manually tune the radio, turn the TUNE/ FOLDER/ AUDIO knob left or right or use the TUNE and FOLDER buttons. To tune and stop at the next broadcast station up or down the band, press the TRACK or SEEK/ CATEGORY buttons.
If playing a CD, pressing the TRACK button will also advance to the next track. Press the SEEK/ CATEGORY button to skip to the beginning of the current track. Press either button repeatedly to skip through multiple tracks. Press and hold either of these buttons to rewind or fast forward.
When you press the SCAN button it will seek out and stop for five seconds at each station along the dial. When you reach a station you want to listen to, press again to make it stop and stay there.
You can set up to 6 AM, 12 FM stations, and if so equipped, 18 SiriusXM Satellite radio stations in memory. First select a radio band by pressing the AM/FM button or, if so equipped, the XM button. Now tune the radio to the desired station. Once you have reached the station you would like to store in memory, press and hold the desired station button, one through six, until a beep sounds, indicating that station has been set in memory. The radio will then resume play. To play a stored station, select the correct radio band, then press the corresponding button, one through six.
When you are listening to the radio and you would like to play a CD that is already loaded, press the DISC/ AUXILIARY button. You can also press this button to play devices plugged into the auxiliary input jack.
To load a CD, the ignition must be at ACC or ON. Insert the disc into the slot with the label side up. The CD will automatically be pulled into the slot and start to play. If the radio has been playing, it turns OFF and the CD begins. To eject a CD, press the EJECT button.
Use the REPEAT and RANDOM buttons while a CD is being played to change the play pattern among random, repeat and normal play of discs and their tracks. These features also change the play pattern of MP3 discs and optional features, such as iPods® and USB devices, if so equipped.
To adjust audio settings, you'll press the AUDIO button. You can adjust bass, treble, balance and fade. Simply press the AUDIO button repeatedly until the audio effect you want to adjust appears in the display. Then turn the TUNE/ FOLDER/ AUDIO knob left or right to adjust it to the desired level. Once you have finished adjusting the feature, press the AUDIO button until the radio or CD display appears.
If your vehicle is equipped with SSV, or Speed Sensitive Volume, you can use this feature to make the audio louder at faster speeds and quieter at slower speeds. You can adjust SSV by pressing the SETTING button on the control panel and selecting "Audio."
If so equipped, there is an auxiliary input jack located inside the center console storage box. This jack accepts any standard analog input device, such as a cassette tape player, CD player, MP3 player or laptop computer. After plugging in a device, press the DISC/ AUXILIARY button to begin play.
If your vehicle is equipped with a USB jack, plug a compatible storage device, such as an iPod®, into the jack to play audio files stored on the device. Once the device is plugged into the jack, press the DISC/ AUXILIARY button repeatedly to switch to the USB input mode. Refer to your Owner's Manual for more details on all audio system operations.
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке: