How to Install the EZ Zip One Piece Push-In Bottom Seal

Описание: This video details how to install the EZ Zip One Piece Push-In Bottom Seal manufactured by Action Industries right here in the USA. The new innovative patent pending bottom seal is a true time and money saving game changer. Unlike a traditional bottom seal that has to be fed through an aluminum retainer, the retainer and bottom seal are connected as one piece. This saves both time and money during the ordering and installation process. Order yours today here: https://shopactiondirect.com/product/...

============================Table of Contents=============================
0:00 Introduction
0:50 Tools Needed
1:10 Step 1 - Measure the bottom of your garage door
1:21 Step 2 - Lay the seal flat using any weighted objects. Mark the length of your garage door using a marker
1:37 Step 3 - Using the hacksaw, cut through the rigid PVC. Then use the scissors to trim the flexible end to make a straight cut
1:51 Step 4 - Raise your garage door to around shoulder height or a height you're comfortable working at
1:59 Step 5 - Using your drill, Phillips drill bit and the screws included in your kit, start on one end and work your way across placing a screw about every 6 inches
2:37 Step 6 - With the rigid side secure to the bottom of the garage door, push in the flexible seal. Start on one end and work to the other side
3:01 Step 7 - Close your garage door to test the seal.