How to Install - Innovative Lighting Solutions - Garage Door Lighting System

Описание: This unique garage door lighting system from Innovative Lighting Solutions solves the problem of shadows being cast in your garage when the garage door is open. This video will take you step by step to installing the LED lighting on the inside of your garage door that will turn your open door into a 14,400 lumen overhead light source. Once installed you will be amazed by your new bright and improved garage door lighting situation. So install yours today!

Purchase yours here - https://www.northshorecommercialdoor....

============================= Table of Contents: =============================
0:00 Introduction to the garage door lighting system
0:56 Tools needed for the installation job
1:11 Step 1 - Mount the wiring harness to the garage door
2:10 Step 2 - Clean the lighting path along garage door with acetone or rubbing alcohol
2:38 Step 3 - Apply double sided tape to area just cleaned
2:59 Step 4 - Peel paper back off LEDs and double sided tape. Mount LEDs to tape
3:35 Step 5 - Connect wiring harness to LEDs, mount white square clips. Zip tie connection to the clips
4:02 Step 6 - Open garage door, line up door and track bracket. Mark pilot holes.
5:33 Step 7 - Drill the 3 marked pilot holes. Install screws and bolt to door and track bracket
6:24 Step 8 - Mark and drill pilot holes. Mount the power supply. DO NOT PLUG IN yet
7:09 Step 9 - Connect the wiring harness to the door bracket
7:44 Step 10 - With garage door closed. Connect the power supply to the track bracket
8:10 Step 11 - Plug in the power supply
8:15 Step 12 - Open the garage door to test the system