Do-More PLC Example Program Flip Flop

Описание: The flip flop circuit is one of the frequently used ladder logic circuits. The same normally open pushbutton start is used to start and stop output.
A one-shot (leading edge) signal on the pushbutton is used to set or reset and internal contact depending if the output is on or off. This internal contact is used then to set the output.
The physical operation of the input and output (IO) is used along with the visual monitoring of the ladder logic code. You can see how this circuit works.

Programming and examples of the BRX Do-More series can be found at this URL:
https://accautomation.ca/series/brx-d...

General information on the BRX Do-More series of controllers:
https://www.automationdirect.com/do-m...

There are also system configuration tools that will calculate the power budget, I/O count, and price.
BRX Do-More PLC Configuration:
https://www.automationdirect.com/do-m...

There are several reasons why we are using the BRX Do-More Controller. Here are just a few.
– Standalone PLC with built-in I/O
– Built-in Data Logging
– Communication ability – Ethernet Port, RS232, RS485, USB – support for protocols such as Modbus RTU, Modbus TCP, ASCII, K-sequence (DirectLOGIC users), Custom Protocols (ASCII over serial, TCP or UDP over Ethernet)
– Built-in Analog input and output
– Integrated motion control
– High-speed counters
– Powerful instruction set (Video of Instructions in software)
– Ability to expand the system with a variety of modules
– Part of the Do-More series of PLCs which use the same free software. (Do-More Designer)
– Integrated simulator in the software capable of external communications for testing

#shorts
ACC Automation
https://accautomation.ca/