Ep 13-Finished walls and installing rafters for the roof.

Описание: Buna dimineata cu o cafea buna.
Saptamana acesta a fost o saptamana foarte buna pt ca am terminat de ridicat peretii de la cabana si asa cum v-am povestit in episodul anterior am terminat cu ridicarea barnelor de la tavan cu ajutorul unui vecin care a venit cu un buldoexcavator dotat cu niste lame si asa le-am ridicat deasupra si apoi doar le-am orientat pe pozitie. Barnele de la pereti dar si restul au fost destul de grele, cam 50-80 kg o barna dar au fost si altele de peste 80 kg. Am reusit in zilele aceste sa ma ocup de ridicarea acoperisului format din capriori, barna de la coama si sa bat o parte din astereala.
Barna de la coama am ridicat-o cu ajutorul a inca trei vecini pt ca am facut-o dintr-o singura bucata, este grea si nu avem sanse sa o ridic singur.Si asa, in 4 persoane nu a fost chiar floare la ureche. Tot am depus ceva efort ca sa o ridicam pana la 2 metri inaltime. Asa cum am spus mai sus, barna de la coama acoperisului am facut-o dintr-o singura bucata adica dintr-un molid in diametru de vreo 15 cm la capatul subtire si vreo 20-22 cm la capatul gros iar lungimea este de 8,5 metri. Toata dintr-o singura bucata. Dupa ce am fixat barna de la coama am inceput sa asez si sa fixez capriorii dupa care am batut astereala pe acoperis care mi-a luat cam doua zile.Vremea a fost buna cu soare si apusuri frumoase si in sfarsit am reusit sa bat toata astereala si in urmatoarele 2 zile am pus si acoperisul comandat. Dupa ce am sa termin acoperisul am sa incep munca de jos daca pot sa spun asa. Ma apuc de slefuit lemnul pe interior. Aici o sa fie muuult praf de rumegus.

Good morning with a good coffee.
This week was a very good week because I finished raising the walls of the cottage and as I told you in the previous episode I finished raising the beams from the ceiling with the help of a neighbor who came with a backhoe equipped with some blades and so I raised them on top and then I just oriented them in position. The beams from the walls and the rest were quite heavy, about 50-80 kg a beam but there were others over 80 kg. I managed these days to take care of raising the roof formed by rafters, the ridge beam and to knock down part of the flooring.
I raised the ridge beam with the help of three more neighbors because I made it in one piece, it is heavy and we have no chance of lifting it alone. And so, with 4 people it was not exactly a piece of cake. We still put in some effort to raise it to 2 meters high. As I said above, I made the ridge beam of the roof from a single piece, that is, from a spruce with a diameter of about 15 cm at the thin end and about 20-22 cm at the thick end and the length is 8.5 meters. All from a single piece. After I fixed the ridge beam, I started to place and fix the rafters, after which I hammered the roofing on the roof, which took me about two days. The weather was good with sunshine and beautiful sunsets and I finally managed to hammer all the roofing and in the next 2 days I also put the ordered roof. After I finish the roof, I will start working from the bottom, if I may say so. I will start sanding the wood on the inside. There will be a lot of sawdust here.

You will see more things and details here and in the following links.

  / barlogulursului.dorna  
   / @momentsfromnaturesilviumatei  
  / silviu.matei.54  
  / silviumatei2000