Honeybadger X8 / Red Komodo 15mm

Описание: THIS VIDEO IS UNSTABILIZED

Shot on a Red Komodo , 6k 16:9, 25fps and an 180degree shutter angle.

The Honeybadger X8 is a Cinelifter designed without any compromises, with 9" props it can be flown like a 5" freestyle quad to archieve shots that are on the edge of what physics allows us to do.
The top notch performance is archieved through a design thats balanced on all axis while retaining a high prop disk area in relation to the frame size.
Our goal with this frame was to create a plattform to carry a cinema camera such as the RED Komodo while pushing the flight performance to a level where stabilization of the Footage is not neccessary.
But don't trust our words, watch the unstabilized freestyle video with a RED Komodo below and see for yourself.

To complete a full frame set, you will need an additional alphagel camera mount.
The Honeybadger X8 Frame is using the same cam mounting pattern as the shendrones thicc, all cam mounts for the thicc are aso compatible with the Honeybadger X8 frame and can be reused
For the best performance, use the RR FPV Alphagel Mount wich is available at https://rrfpv.com/RR-Siccario-AlphaGe... and will be available on the TBS Store soon.
Our Recommended Setup for 6s:
1x Honeybadger X8 Cinelifter Frame
1x RR FPV Alphagel Dampening Plate
8x Brotherhobby T5 1050kv Motors
2x Hobbywing 60A 4in1 ESC
1x Fettec Spike Absorber
2x 2000uF 50V Low ESR Capacitors
1x Mateksys F722-HD FC
1x DJI FPV Air Unit
2x MMCX to SMA Adapter
2x Triumph Pro LHCP Extra Long
1x Polulu 12v 2.4A Step Down Regulator
1x TBS Nano Diversity RX
2x TBS Crossfire Immortal T Extended
This Frame was designed in germany and switzerland by Paul Kuhn and Noah Waldner.

You can buy the frame in the following stores.

China (Worldwide shipping):
Team Black Sheep: https://www.team-blacksheep.com/produ...

Germany (Europe shipping):
N-Factory: https://n-factory.de/TBS-Honeybadger-...

Swiss:
Pureflight: https://www.pureflight.ch/de/9-10-fra...

USA / Arizona:
Addictive RC: https://shop.addictiverc.com/products...

Here you can download the 3-D Prints to build your Honeybadger:
https://www.thingiverse.com/thing:488...

You can also buy BNFs here:
https://rrfpv.com/RR-HoneyBadger-PRO-...