DM-28Q Dynamotor Startup
Автор: The Radio Pleasure Palace
Загружено: 2014-02-03
Просмотров: 3695
Описание: Finally got the DM-28 dynamotor for my BC-348 up and running. Had a big problem with a stuck brush. The brush wasn't making contact with the commutator. After a 2-week soaking in WD-40, the thing still wouldn't budge. I had to completely disassemble the dynamotor and drive the brush out from the inside. The unit was then cleaned, lubricated and reassembled. The bearings were cleaned in an ultrasonic tank with hot water, then were dried with high pressure air, followed by a baking under a heat lamp. I lubricated the bearings with moly-grease, being careful not to "pack" them, as so directed in the BC-348 receiver's service manual. This is the initial power-up.
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке: