etrailer | ATO/ATC Dual Fuse Tap: The Breakdown

Описание: Click for more info and reviews of this Buyers Products Wiring:
https://www.etrailer.com/Accessories-...
Check out some similar Wiring options:
https://www.etrailer.com/dept-pg-Acce...

https://www.etrailer.com
Don’t forget to subscribe!
   / etrailertv  

Full transcript: https://www.etrailer.com/tv-Demo-Buye...
Today we're gonna take a look at the dual ATO/ATC fuse holder. Now this dual fuse holder will turn one fuse slot on your vehicle into two to protect your vehicle's electrical system when you're adding accessory. Basically you'll just plug this into an occupied slot or a vacant energized spot in your fuse box. So it is ideal for accessories, lighting, snow plower or soft spreading operation.This one is designed to fit the fuse style ATO or ATC. Now the fuses are not included. Now for demonstration I did happen to pull a few them.

I just wanna show you how you would plug this in. Basically what you would do is find a slot in your fuse box, let's say there's one with a 10 amp fuse in it, you can remove that, plug this tap into where the fuse was and then tale your 10 amp fuse and plug that into the bottom and that'll be your main fuse. And then you'll have this length of wire here, it's about five inches long, 16 gauge wire with a connector on the end, just attach this to your accessory. Once you your accessory attached them you'll take your five amp fuse and just put that under the top one and that'll give you the fuse protection for that accessory. It will take up to a five amp fuse.So the main fuse capacity is 10 amps, added fuse capacity would be five amps.

This part is assembled in the U.S.A but that should do it for the review on the dual ATO and ATC fuse holder.