Tronex - Oval & Taper Head Cutting Edge Finishes
Автор: Desco Europe
Загружено: 2021-03-04
Просмотров: 201
Описание:
Tronex offers multiple cutting edge finishes for our Oval and Taper Head cutters to meet your specific desired cutting results. The oval and taper head cutters are available in three edge finishes: Semi-Flush, Flush, and Razor Flush®.
Semi-Flush cutting edges feature a small edge bevel on the cutter and are typically used to cut thicker wire and leads. Semi-Flush edges will leave a “pinch” in the middle of the end of material being cut. These cutting edges will resist dulling the most of the three cutting edges.
Flush cutting edges feature a very thin edge bevel on the cutter that leaves only an exceptionally small “pinch” in the middle of the end of the material being cut. Many users prefer a Flush edge finish because it provides a balance between a long cutting life, a flush cut, and cost.
Razor Flush® cutting edges feature no bevel on the cutters. This results in exceptionally sharp edges which produce cuts with virtually no raised surface on the lead. The cutter operates like two razor blades coming together. Each cutter has a fine set screw stop built into the jaw of the cutter to prevent the edges from dulling. The Razor Flush® edge finish on Tronex cutters is executed by a proprietary process and thus unmatched by any other precision cutting tool in the world.
To see the full offering of Tronex Oval head cutters:
To see the full offering of Tronex Taper head cutters: https://www.descoeurope.com/Europe-Ca...
Purchase or request a sample at:
https://www.DescoEurope.com
For more information, contact Desco Europe:
E-Mail: [email protected]
Phone: +44 (0) 1462 672005
Website: http://www.DescoEurope.com
Copyright 2021. Tronex and Desco Europe are divisions of DESCO INDUSTRIES INC
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке: