How to Replace Upper Control Arms 2003-2012 Chevrolet Colorado (4x4)

Описание: Shop for New Auto Parts at 1AAuto.com http://1aau.to/c/562/is/control-arms

This video shows you how to install new upper control arms from TRQ on your 2004-2012 Chevrolet Colorado (4x4). Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear. When those bushings run out, that can have a negative impact on the ride and safety of your vehicle.

Estimated installation time for a professional technician is approximately: 2 hours 12 minutes

This repair was done on a 2009 Chevrolet Colorado WT 3.7L Extended Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2004 Chevrolet Colorado
2005 Chevrolet Colorado
2006 Chevrolet Colorado
2007 Chevrolet Colorado
2008 Chevrolet Colorado
2009 Chevrolet Colorado
2010 Chevrolet Colorado
2011 Chevrolet Colorado
2012 Chevrolet Colorado

Tools you will need:
• Pry Bar http://1aau.to/oaym/1AXAA00020
• 21mm wrench
• 19mm Socket
• 21mm Socket
• 8mm Socket
• Grease Gun
• 1/2 Inch Impact Gun
• Ratchet
• Torque Wrench http://1aau.to/ob5W/1AXAA00044
• Anti-Seize Grease
• Gloves http://1aau.to/ocHK/1AXSS00048
• Safety Glasses
• Floor Jack
• Hammer
• Jack Stands
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Chevy Colorado 2004-2012:    • Chevy Colorado 2004-2012  

📱 Download the TRQ Auto Repair App for more videos, torque specifications, and car repair information: https://trq.video/appdownloadyt

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.