How to Replace Front Lower Ball Joints 1998-2011 Ford Ranger

Описание: Buy Now!
New Ball Joint from 1AAuto.com http://1aau.to/ia/1ASBJ00437
New Ball Joint Set from 1AAuto.com http://1aau.to/ic/1ASBS00007

This video shows you how to install new, quality TRQ ball joints on your 1998-2011 Ford Ranger. Car and truck suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how.

Estimated installation time for a professional technician is approximately: 1 hour 30 minutes

This repair was done on a 2001 Ford Ranger XLT 3.0L Extended Cab Pickup 2-Door 4WD Automatic and the process should be similar on the following vehicles:
1998 Ford Ranger
1999 Ford Ranger
2000 Ford Ranger
2001 Ford Ranger
2002 Ford Ranger
2003 Ford Ranger
2004 Ford Ranger
2005 Ford Ranger
2006 Ford Ranger
2007 Ford Ranger
2008 Ford Ranger
2009 Ford Ranger
2010 Ford Ranger
2011 Ford Ranger

Tools you will need:
• Flat Blade Screwdriver
• Pry Bar http://1aau.to/oap6/1AXAA00020
• 10mm Wrench
• 13mm Socket
• 15mm Socket
• 19mm Socket
• 22mm Socket
• 24mm Socket
• 32mm Socket http://1aau.to/ofI/1AAST00003
• 8mm Socket
• Ball Joint Press
• Brake Caliper Hanger http://1aau.to/oq9/1AXAA00439
• Pickle Fork
• Side Cutters
• Snap Ring Pliers
• Ratchet
• Socket Extensions
• Torque Wrench http://1aau.to/obP4/1AXAA00044
• Bungee Cord
• Copper Anti-Seize
• Rust Penetrant
• Floor Jack
• Hammer
• Jack Stands
• Pole Jack
• Rubber Mallet
• Wheel Chocks
• Wire Brush http://1aau.to/oES/1AXAA00079

Subscribe:    / @trq  

Check out our playlist:
Ford Ranger 1998-2011 3rd Generation:    • Ford Ranger 1998-2011 3rd Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.