the ULTIMATE vespa IGNITION TIMING setting GUIDE | FMP - Solid PASSion |

Описание: sip vape ignition on a quattrini m244, HOW2 set ignition timing.

needed tools:
1: measuring tape or paper
2: sliding caliper
3: marker and knife
4: piston stopper
5: ignition timing light
6: 12v atterie
7: tools for removing flywheel
-holder, - puller, 19 socket, torque key


How to find the right value for variable ignition, like this one.

So the static value is 17-18 degree for all tunings 177-244cc

Two ways are getting you there, or thats at least the way i do it:
1) where does the engine have its biggest power? put 17-18 degree there
2) in which rev area will you ride the engine the most? put 17-18 degree there.

from these points you go back on the ignition graph and you have your starting set value.

While Cruising the engine gets the hottest, so having 18 degrees there is not such a bad thing.

#ignition #timing #FMPguides

--------------------------------------------------------------------------
FOLLOW me on
insta: @FreakMoPed
fb:   / freakmoped  

--------------------------------------------------------------------------
like what u see? found good tips?
u can support FMP via PATREON:
  / freakmoped  
_
DISCLAIMER: the information shown in this video, is about THIS specific hardware. it is my personal observation documented with this video. It DOESNT automatically mean, that all such parts by this producer or seller do have or will have same issues.
_