How To Set Up WireGuard VPN On A Raspberry Pi?

Описание: How To Set Up WireGuard VPN On A Raspberry Pi?

1. Prepare Raspberry Pi System - Update Raspberry Pi using sudo apt update and sudo apt upgrade first, Install WireGuard by entering sudo apt install wireguard in the terminal, Generate key pairs using wg genkey and keep the private key secure.
2. Configure WireGuard Interface - Edit the configuration file at sudo nano /etc/wireguard/wg0.conf carefully, Add private key, assign address 10.0.0.1/24, and set ListenPort 51820, Include peer sections with client public keys and allowed IP ranges.
3. Enable Routing and Service - Enable IP forwarding by uncommenting net.ipv4.ip_forward=1 in sysctl.conf, Apply changes using sudo sysctl -p to activate system routing feature, Start WireGuard using sudo systemctl start wg-quick@wg0 and enable service.
4. Connect And Secure Traffic - Install WireGuard on client devices and configure server’s public key details, Activate tunnel to route all traffic through Raspberry Pi VPN securely, Enjoy safe, private, and reliable network access from anywhere anytime.


🔗 Video Link:    • How To Set Up WireGuard VPN On A Raspberry...  

If you enjoyed this video, please support the channel by subscribing to
👉    / @globalinsights24  

Don’t forget to like the video and share it with others who may find it helpful.

⚠️ Disclaimer: This video is for educational purposes only and should not be considered professional medical, financial, or legal advice. Always consult a qualified expert for personalized guidance.