How to Replace Mass Air Flow Sensor 2010-2016 Cadilliac SRX

Описание: Buy Now!
New Mass Air Flow Sensor from 1AAuto.com https://trq.video/ia-HTEAF00003

This video shows you how to install a new mass air flow sensor from TRQ on your 2010-2016 Cadillac SRX. The Mass Air Flow (MAF) sensor determines the mass flow rate of air entering your vehicle. A trouble code indicating the sensor is not working properly could be because it is dirty, malfunctioning, or damaged, in which case your vehicle may run poorly or enter limp mode. Fortunately, sensors are typically easy to replace.

This repair was done on a 2013 Cadillac SRX Premium 3.6L Sport Utility 4-Door Automatic and the process should be similar on the following vehicles:
2010 Cadillac SRX
2011 Cadillac SRX
2012 Cadillac SRX
2013 Cadillac SRX
2014 Cadillac SRX
2015 Cadillac SRX
2016 Cadillac SRX

Tools you will need:
• T20 Socket
• 1/4 Inch Ratchet https://trq.video/oa7R-1AXAA00017
• 3/8 Inch Drive Ratchet https://trq.video/obrA-1AXAA00015
• Gloves https://trq.video/o2n-1AXSS00048
• Safety Glasses

Subscribe:    / @trq  

Check out our playlist:
Cadillac SRX 2010-2016 2nd Generation:    • Cadillac SRX 2010-2016 2nd Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.