etrailer | In-Depth Review of the B and B Curved Cap for RV Slide-Out Room

Описание: Click for more info and reviews of this B and B Molders RV Slide Out Parts:
https://www.etrailer.com/RV-Slide-Out...
Check out some similar RV Slide Out Parts options:
https://www.etrailer.com/dept-pg-RV_S...

https://www.etrailer.com
Don’t forget to subscribe!
   / etrailertv  

Full transcript: https://www.etrailer.com/tv-Demo-B-an...
Hi everybody, Andy here with etrailer.com. Let's take a brief look together at this B&B Polar White Curved Cap for your RV slide-out. This polar white molded curve cover plate is going to mount on your slide-out room, where the trim panels meet and create a crease. This covers the corner at the tip with these lip edges here. As you can see, it's going to give you protection. And this is considered to be a direct replacement for your standard RV slide-out trim.

As you can see, it does have three mounting holes. It is made here in the USA of a plastic material that is impact and salt resistant. This is not going to fade or yellow from UV rays. Let me go ahead and try to give you some measurements here that might prove helpful for you. I'm gonna try to give you the measurements between our mounting holes first.

So, trying to line this up here so you can see. Looking at the width first from center to center on those mounting holes, we're sitting right about one and three-eighth inches wide. Let me see if I can measure the holes lengthwise. So the two holes on this end will be the same down to our hole here on the other side. So lining that up, I know it's probably gonna be difficult for you to see, but I'm coming up with about four and three-quarters inches long.

Hopefully that's helpful. And then, looking at the overall length, we are really close to seven inches long. And then looking at the width here at the widest point, looks like we're right at about two and seven-eighth inches wide. Well, that's gonna wrap up our real quick look today. I do hope that our brief time together was helpful.

Again, my name is Andy, thank you for joining me.