Ruger PC Carbine All-In-One Pro Bundle – Install Guide & Overview

Описание: THIS RUGER PC CARBINE ALL-IN-ONE PRO PERFORMANCE BUNDLE
The trigger spring kit and extra power recoil spring featured in this video have been discontinued and are no longer available for purchase. This video is kept as a technical reference for disassembly, parts orientation, and general installation concepts.

In this video, we walk through a complete install of the M*CARBO All-In-One Pro Performance Bundle for the Ruger PC Carbine. The bundle combined several upgrades—trigger components, internal bolt parts, magazine release, and a muzzle brake—to help refine trigger feel, improve controllability, and support more consistent operation when installed and used correctly.

We begin with an overview of the parts and tools needed, then field strip the rifle and remove the internal components from the receiver. The video covers bolt head pins and extractor replacement, bolt top disassembly and reassembly, trigger group disassembly and parts installation, chassis magazine release replacement, and finally installation and timing of the muzzle brake. We end with a function check and a comparison of factory vs. modified trigger pull.

Although this exact bundle and certain individual parts are discontinued, the step-by-step breakdown of the Ruger PC Carbine remains useful for understanding how the internal systems fit together, how to safely remove and reinstall key assemblies, and what to check when verifying proper function after any modification or maintenance.

TIMECODES:
Intro - 00:00
Parts Needed - 01:11
Tools Needed - 06:35
Firearm Clear - 07:06
Factory Trigger Pull - 07:13
Field Strip - 07:28
Removing Receiver Internal Parts - 10:19
Bolt Head Pins and Extractor Replacement - 12:11
Bolt Top Disassembly - 14:44
Bolt Top Parts Installation - 15:32
Bolt Reinstallation - 16:58
Trigger Group Disassembly - 17:52
Trigger Group Parts Review - 20:41
Trigger Group Parts Installation - 21:35
Trigger Group Reinstallation - 29:36
Chassis Mag Release Replacement - 30:09
Chassis Reinstallation - 32:41
Receiver Review - 35:14
Muzzle Brake Replacement - 35:30
Muzzle Brake Realignment - 37:27
Barrel Reinstallation - 40:06
Function Check - 40:28
Modified Trigger Pull - 40:43
Wrap-Up / Outro - 40:55

Safety & Responsibility:
Always verify that your Ruger PC Carbine is completely unloaded before beginning any work. Remove the magazine, lock the bolt open, and visually and physically inspect the chamber to confirm it is clear. Follow all standard firearm safety rules and work in a safe, organized environment. After any changes to trigger components, bolt parts, magazine release, or muzzle device, perform thorough function checks and test the rifle at the range with appropriate ammunition to confirm safe and reliable operation. If you are unsure about any part of the disassembly, installation, or reassembly process, or do not feel fully confident performing it yourself, consult a qualified gunsmith.

This content is for educational and informational purposes only and is intended for responsible, legally authorized firearm owners in accordance with all applicable local, state, and federal laws.

#MCARBO #RugerPCCarbine #RugerPCCharger