make sopner step by step in nx

Описание: how to make a camlin pencil in nx


A pencil (/ˈpɛnsəl/ (listen)) is a writing or drawing implement with a solid pigment core in a protective casing that reduces the risk of core breakage, and keeps it from marking the user's hand.

Pencils create marks by physical abrasion, leaving a trail of solid core material that adheres to a sheet of paper or other surface. They are distinct from pens, which dispense liquid or gel ink onto the marked surface.

Most pencil cores are made of graphite powder mixed with a clay binder. Graphite pencils (traditionally known as "lead pencils") produce grey or black marks that are easily erased, but otherwise resistant to moisture, most chemicals, ultraviolet radiation and natural aging. Other types of pencil cores, such as those of charcoal, are mainly used for drawing and sketching. Coloured pencils are sometimes used by teachers or editors to correct submitted texts, but are typically regarded as art supplies, especially those with cores made from wax-based binders that tend to smear when erasers are applied to them. Grease pencils have a softer, oily core that can leave marks on smooth surfaces such as glass or porcelain.

The most common pencil casing is thin wood, usually hexagonal in section but sometimes cylindrical or triangular, permanently bonded to the core. Casings may be of other materials, such as plastic or paper. To use the pencil, the casing must be carved or peeled off to expose the working end of the core as a sharp point. Mechanical pencils have more elaborate casings which are not bonded to the core; instead, they support separate, mobile pigment cores that can be extended or retracted (usually through the casing's tip) as needed. These casings can be reloaded with new cores (usually graphite) as the previous ones are exhausted.

NX MODAL TWO PINE TOP MODAL OF POWERCORD LEADदो पाइन पावर कॉर्ड का शीर्ष मॉडल #engineering #software

power cord USed to connect SMPS and loads to AC Sockets. Description: This is a 2Pin AC Power Supply cable with One End 2-PIN Male and another end is Open Ended Cable. These cables are easy to be used in the Power Supply SMPS, Printer, Testing Purpose, etc.

Siemens NX 10 tutorial
UG NX 10 tutorial beginner.
Unigraphics NX 10 tutorial for beginners.
Siemens NX 10 essential training
NX basic commands
NX basic tutorial
NX 10 basic tutorial
NX 10 basics
NX10 modeling
NX10 part modeling

#NXTutorial #CADCAMTutorials #CADTutorials
#SiemensNX #NXCAD #siemensnxtuto

thank you to watch my video