Gyroflow | Runcam 5 Orange | 4K30fps (XV) test | FPV Cinewhoop

Описание: The Runcam 5 Orange's 4K XV format (3840x2160) is a 16:9 aspect ratio format that uses the full sensor. It actually stretches the normal 2880x2160 4K 4:3 format horizontally, making everything a bit distorted. This video shows what this format looks like stabilized in Gyroflow 1.0.0 rc3.

The FOV was reduced to 94% to allow Gyroflow to use perimeter pixels in the stabilization process for this particular video. Some of the black sections that crept in indicates I should have used a FOV of a few percent less that 94% making more pixels available. You can adjust the FOV and other stabilization settings manually to achieve the level of stability you desire. The more stability you want, the smaller the FOV.

There is a little jello in this video because I went with a stiffer Runcam 5 mount for this flight. A softer mount or use of an ND filter would reduce or eliminate this jello camera effect.

Runcam 5 Orange Settings
======================
Video quality - High
Resolution - 4K@30fps (XV)
Shutter - 1/60
ISO Sensitivity - 100
Color Style - Flat
Distortion correction - Off
Electronic Image stabilization - Off
Saturation – Low
Exposure compensation - 0
Contrast – Low
Sharpness - Low
Metering mode - Average
White balance - Sunny (Don't use AUTO)
Low Light Image Enhancement - OFF

In POST
======
Color Graded
Saturation boosted
===================================
It looks OK in this format though stretched. The world has moved on from HD (2880 x 2160). The sensor in the Go2 is 2880x2880 to yield 2.7K and the Hero8's is 4000x3000 to yeild UHD. To stabilize Ultra HD (3840x2160) takes at least what the Hero 8 sensor has. I expect Runcam to come out with something better soon. There are hints Gopro may also be working on a Session 5 replacement (for us). There is a niche in the 60 gram cube-style that needs to be filled. I mainly have been using the Runcam 5 to get experience with Gyroflow 1.0.0.