How to Make a DIY brake bleeder kit

Описание: How to Make a Pressure Brake Bleeder
Diy bleeding kit for bleeding your brakes in one person for around 20$
1. Cross 4P Female 1/4 - https://s.click.aliexpress.com/e/_olY... - 2.59$
2. Male to Male 1/4 conector - https://s.click.aliexpress.com/e/_olY... - 0.64$
3. AR2000 1/4" Pressure Regulator with 2 x 6mm - https://s.click.aliexpress.com/e/_olL... - 6.09$
4. Ball Valve 1/4'' Male to Male - https://s.click.aliexpress.com/e/_ok8... - 2.31$
Total 11.63$
5. Pneumatic Check Valve 1/4'' Male to Female - https://s.click.aliexpress.com/e/_omf... - 3.01$ (optional - you can pump the tyre valve directly and then connect the bootle, then buy a 3P T connector 1/4'' instead of the 4P at point 1)
Some 6mm hose
1 water pressure gauge 1/4 - 6 or 10 bar - depending on how much pressure you can pump your bottle to. I wouldnt recomment going higher the 8 bar - since they blow up at around 10 bar.

For the cap
1 Brass Hose Fitting conector 1/8 connector with 6mm hose - must match what you put the exit of the pressure regulator ( note the pressure reuglator comes with 2 of them but you need 3 one more to connect the hose from the botle with the tyre valve) - https://s.click.aliexpress.com/e/_oFy... - 0.28$
1 1/8 brass nut - https://s.click.aliexpress.com/e/_opK... - 0.57$
1 brake plastic cap that matches your car

Extra
Car bleeder valve one way - https://s.click.aliexpress.com/e/_oBr...