STAINLESS STEEL FLUX FOR SOLDERING AT LOW TEMPERATURE !!!
Автор: Dave Nooner
Загружено: 2023-03-29
Просмотров: 285
Описание: Please be aware that these acids and chemicals need extra caution when working with. Put this in a plastic sink basin or something that can contain a spill if it would happen. So do this ONLY if you are sure you can handle this. I found this recipe from a Robert Smith. I used 5 grams of copper carbonate and 50 grams of 75% phosphoric acid. This can react with a lot of foam if you mix it too fast. Use safety eye wear and rubber gloves for sure. This is not critical on the weights, just close is fine. I had 5.1 grams and 50.05 I believe, so don't panic...close is fine. Clean your metal with sand paper and or scotch bright like pads, and use acetone or the like, to get rid of all oils, before you solder. Having these skills can get you out of a jam when you need to repair things or build with stainless steel. Welding stainless is useful but if you just need to contain something liquid for low temperatures, this will work all day long. Good luck!! And ... good safety !!!
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке:
