ما هو ال crawling و ال cogging فى ال induction motor وكيفية التغلب عليهم | cogging and Crawling

Описание: #abdelraouf89
#بتاع_كهربا
#أنت_المستفيد
The important characteristics normally shown by a squirrel cage induction motors are crawling and cogging. These characteristics are the result of improper functioning of the motor that means either motor is running at very slow speed or it is not taking the load.
Crawling of Induction Motor
It has been observed that squirrel cage type induction motor has a tendency to run at very low speed compared to its synchronous speed, this phenomenon is known as crawling. The resultant speed is nearly 1/7th of its synchronous speed. Now the question arises why this happens? This action is due to the fact that harmonics fluxes produced in the gap of the stator winding of odd harmonics like 3rd, 5th, 7th etc. These harmonics create additional torque fields in addition to the synchronous torque.
The torque produced by these harmonics rotates in the forward or backward direction at Ns/3, Ns/5, Ns/7 speed respectively. Here we consider only 5th and 7th harmonics and rest are neglected. The torque produced by the 5th harmonic rotates in the backward direction. This torque produced by fifth harmonic which works as a braking action is small in quantity, so it can be neglected. Now the seventh harmonic produces a forward rotating torque at synchronous speed Ns/7. Hence, the net forward torque is equal to the sum of the torque produced by 7th harmonic and fundamental torque. The torque produced by 7th harmonic reaches its maximum positive value just below 1/7 of Ns and at this point slip is high. At this stage motor does not reach up to its normal speed and continue to rotate at a speed which is much lower than its normal speed. This causes crawling of the motor at just below 1/7 synchronous speed and creates the racket. The other speed at which motor crawls is 1/13 of synchronous speed.
Cogging of Induction Motor
This characteristic of induction motor comes into picture when motor refuses to start at all. Sometimes it happens because of low supply voltage. But the main reason for starting problem in the motor is because of cogging in which the slots of the stator get locked up with the rotor slots. As we know that there is series of slots in the stator and rotor of the induction motor. When the slots of the rotor are equal in number with slots in the stator, they align themselves in such way that both face to each other and at this stage the reluctance of the magnetic path is minimum and motor refuse to start.