Installing Ring Connectors On A CNC Spindle Cable

Описание: In this detailed tutorial build is performed by Vince at eDealers Direct Automation walks you through the complete process of installing ring connectors for VFD integration including full soldering of each connector, and boot installation.

This step-by-step guide covers everything from prepping the wires to precision soldering and final assembly, ensuring a safe, secure, and reliable connection for your CNC robot.

Whether you're upgrading your HY spindle setup, troubleshooting connection issues, or simply looking to refine your soldering and wiring techniques, this video provides the expert insights and hands-on guidance you need.

Every step requires precision, and Vince breaks down the entire process, so you can achieve professional-quality results in your own workshop.

#HYSpindle #SpindleCable #CNCWiring #SpindleConnector #Soldering #PrecisionSoldering #CNCSpindle #HYSpindleConnector #CNCMachine #CNCBuild #Automation #IndustrialAutomation #ElectricalWiring #SolderingTips #ConnectorInstallation #HYSpindleCable #WiringTutorial #DIYCNC #CNCProjects #CNCUpgrade #Machining #Manufacturing #Electronics #Engineering #AutomationTech #EDirectAutomation #eDealersDirect #CustomWiring #TechTutorial #CNCCommunity #Makers #Fabrication #CNCSetup #Workshop #Tools #ElectronicsRepair #WiringGuide #DIYElectronics #IndustrialMachinery #SolderingTechniques #CableManagement #PrecisionEngineering #CNCEnthusiast #ElectronicsHobbyist #ProfessionalSoldering #CNCExpert #CustomCNC #HYSpindleWiring #CNCShop #TechWorkshop #HandsOnTech #MakerCommunity #CNCFabrication #IndustrialTech #SolderingIron #SpindleRepair #WiringPro #TechEducation #ConnectorGuide #MachineShop #SpindleInstallation #HYSpindleUpgrade #SpindleConnection #DIYEngineering #CNCMasters #Metalworking #Circuitry #cncmaintenance

Below is a link to my soldering components that support the issues covered in this video.

Kester #44 Rosin Solder & Kester 186 RMA Flux, Heat Shrink 3mm,6mm,1/2in Pro Kit https://www.ebay.com/itm/142817628786

Kester #44 Single Tube Solder & Kester 186 RMA Flux & Heat Shrink 3mm,6mm,1/2in https://www.ebay.com/itm/132990261815

Kester #44 Rosin Solder & Kester 186 RMA Flux, De-soldering Braid & Heat shrink https://www.ebay.com/itm/143060430007

Here's the link to the Yihua 995D+ Soldering Station Package https://www.ebay.com/itm/133213693952

Here’s the link to the Yihua 908+ Soldering Iron Package https://www.ebay.com/itm/144027196930

Here’s the link to the Yihua 200C Automatic Tip Cleaner https://www.ebay.com/itm/144909497727

CNC components are listed below.

Pro-Grade CNC Electronics Enclosure Pre-Milled (EMI Shielded) 19W x 24Lx 8.75H https://www.ebay.com/itm/132210265015

CNC Ground Buss Bar System Complete With SC25-8 Terminals And 2Ft. Ground Strap https://www.ebay.com/itm/143107363730

CNC Power Supply 48v 12.5a (600w) With Built In EMI Filter
https://www.ebay.com/itm/143685077396

Zippy VW1 (IP67 Rated) 3 Waterproof CNC Limit/Home Switches
https://www.ebay.com/itm/133652809249

Zippy VW1 (IP67 Rated) 4 Waterproof CNC Limit/Home Switches
https://www.ebay.com/itm/133652811447

Here's a link to my Ethernet Smooth Stepper turnkey package https://www.ebay.com/itm/133064380079

Here's a link to my UC-400 Ethernet Turnkey Controller package https://www.ebay.com/itm/144862296429

CNC 18/4 Double Shielded Pre-Built Motor Cable With All Required Connectors
https://www.ebay.com/itm/133300288430

CNC 18/4 Double Shielded Built Motor Cables (3) With Dual GX-16 5 Pin Connectors
https://www.ebay.com/itm/143498883290

CNC 3-18/4 Double Shielded Pre-Built Motor Cable & GX-16 Filtered Connectors
https://www.ebay.com/itm/144280353346

CNC 18/4 Double Shielded Pre-Built Motor Cable & GX-16 Filtered Panel Connector
https://www.ebay.com/itm/144279518155

CNC Double Shielded Breakout Communication Cable (Gecko Drive, Onefinity CNC) https://www.ebay.com/itm/143650166809

This is my DS Flexion (Ultra Flex) cable.

CNC VFD Cable 10ft 16/4 DS Flexion For Spindle .8Kw 1.5Kw 2.2Kw 4Kw 4.5Kw https://www.ebay.com/itm/133891676093

CNC VFD Cable 15ft 16/4 DS Flexion For Spindle .8Kw 1.5Kw 2.2Kw 4Kw 4.5Kw https://www.ebay.com/itm/133891673596

CNC VFD Cable 20ft 16/4 DS Flexion For Spindle .8Kw 1.5Kw 2.2Kw 4Kw 4.5Kw
https://www.ebay.com/itm/132649829362

This is my standard 16/4 double shielded spindle cable. (If you're using a cable chain, then my DS flexion cable should be used)

CNC VFD Cable 10ft 16/4 Double Shielded For Spindles https://www.ebay.com/itm/142538105021

CNC VFD Cable 15ft 16/4 Double Shielded For Spindles https://www.ebay.com/itm/133273996534

CNC VFD Cable 20ft 16/4 Double Shielded For Spindles https://www.ebay.com/itm/131899174942

CNC VFD Cable 30ft 16/4 Double Shielded For Spindles https://www.ebay.com/itm/133273998565