SOUDAL FixAll X-treme Power - the ultimate extreme tack adhesive

Описание: DESCRIPTION
Fix ALL X-Treme Power is a high quality, neutral, elastic, 1-component adhesive sealant based on MS-Polymer with an extremely high initial tack of min. 400 kg/m².
CHARACTERISTICS
Extreme high initial tack of min. 400 kg/m²
Fast curing
Good workability with included triangular shaped nozzle.
High shear strength after full cure (no primer)
Stays elastic after curing and very sustainable
No odour
Free of isocyanates, solvents, halogens and acids
Good colour stability, weather and UV resistance
Excellent adhesion on nearly all surfaces, even if slightly moist.
APPLICATIONS
Bonding in building and metal industry.
Elastic bonding of objects, panels, profiles and other pieces on the most common substrates.
For bonded facade panels we refer to the Soudal Panel System.
Elastic structural bonding in automotive applications: buses, trains, trucks, caravans, ship-building, …
DIRECTIONS FOR USE
Application method: Apply the adhesive with a caulking gun onto one surface in beads or dabs (every 15 cm). Always apply adhesive to the edges and corners of panels. Press the surfaces together and batten down with a rubber hammer. Support of the bonded materials may be required. The bond can be fully loaded after 24-48 hours.
Cleaning: Clean with white spirit or Surface Cleaner immediately after use.
Finishing: With a soapy solution or Soudal
Finishing Solution before skinning.
Repair: With the same material
REMARKS
Fix ALL X-Treme Power is paintable with most waterbased paints, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before appication.
The drying time of alkyd resin based paints may increase.
Fix ALL X-Treme Power can be applied to a wide variety of substrates. Due to the fact that specific substrates such as plastics, like polycarbonate, etc, may differ from manufacturer to manufacturer, we
recommend preliminary compatibilty test.
Fix ALL X-Treme Power can not be used as a glazing sealant.
Fix ALL X-Treme Power can be used for bonding of natural stone, but it cannot be used as a joint sealant on this type of surface. Fix ALL X-Treme Power can therefore only be used on the bottom of natural stone tiles.
When applying, make sure not to spill any sealant on the surface of materials.