Rebuilding a Center Console Fishing Boat - Episode 16: Wiring

Описание: Welcome to my boat rebuild series on my 1983 20' Sea Ox.
Today, I run the first few wires through the rigging tube from the rear box to under the console and discuss my thought process along the way. I included a 30A breaker to protect the electrical circuit that leads from the switch to the main fuse panel. I used 10 gauge wire for that and 14 gauge duplex wire for the bow and stern lights. And just to specify, the amount of AMPs you need on the breaker depends on what gauge wire you're running through it, so be sure to confirm that before hooking everything up yourself.

🗞Material Used in this Video:
Blue Seas Fuse Block: https://amzn.to/45HANR8
Fuse Kit: https://amzn.to/3WvhWVb
Ancor Marine Grade Wire (10 AWG): https://amzn.to/45z6NXl
Ancor Flat Duplex Cable (14 AWG): https://amzn.to/3OEZnf7
Marine Electric Terminals Kit: https://amzn.to/43q7SPv
Marine Circuit Breaker (30 AMP): https://amzn.to/436HoCU

🗞Materials & Tools:
Milwaukee Kit: https://thd.co/3hyjNEX (bought on sale for $500)
Marine Grade Plywood (4'x8' 3/4" Fir): Local Lumber Yard
Insulation Board: https://thd.co/3KcAfHo

🗞Fiberglass & Resin (US Composites):
Polyester Resin: https://bit.ly/poly-resin
1/4" Chopped Strand: https://bit.ly/chopped-strand
Cabosil: https://bit.ly/cabosil-thickener
Mixing Tubs: https://bit.ly/mixing-tubs
Popsicle Sticks: https://bit.ly/popsicle-sticks

🗞Fiberglass & Resin (Amazon):
Polyester Resin: https://amzn.to/3iFpNMk
1/4" Chopped Strand: https://amzn.to/370Flou
Cabosil: https://amzn.to/2TAHRyJ
Popsicle Sticks: https://amzn.to/3eV4rcB
Fiberglass Rolling Tools Kit - https://amzn.to/3mVlort

🦺Safety Gear:
3M Respirator - https://amzn.to/2TiGzYH
3M Filters - https://amzn.to/3oM9hwK
Cowhide Gloves - https://amzn.to/3wCa46b
Tyvek Suit - https://amzn.to/3vmU8UW
Safety Goggles - https://amzn.to/2RCZMny
Xtra Tuffs - https://amzn.to/3oVzPLZ