How to Replace Front Brakes 2007-2013 Acura MDX

Описание: Buy Now!
New Brake Rotor Set from 1AAuto.com http://1aau.to/ic/1ABFS05877
New Brake Pad & Rotor Kit from 1AAuto.com http://1aau.to/ic/1ABFS06066
New Brake Pads from 1AAuto.com http://1aau.to/id/1ABPS02835

This video shows you how to install front brake pads and rotors on your 2007-2013 Acura MDX. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes.

This repair was done on a 2008 Acura MDX Base 3.7L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2007 Acura MDX
2008 Acura MDX
2009 Acura MDX
2010 Acura MDX
2011 Acura MDX
2012 Acura MDX
2013 Acura MDX

Tools you will need:
• Flat Blade Screwdriver
• Pocket Screwdriver
• Pry Bar http://1aau.to/oHv/1AXAA00020
• 10mm Socket
• 14mm Socket
• 22mm Socket
• Brake Caliper Compressor Tool. Single Piston. Lever Style.
• Brake Caliper Hanger http://1aau.to/ofx/1AXAA00439
• Locking Pliers
• Pliers
• 1/2 Inch Breaker Bar
• Ratchet
• Socket Driver
• Torque Wrench http://1aau.to/oajn/1AXAA00044
• Brake Grease
• Brake Parts Cleaner
• Copper Anti-Seize
• Gloves http://1aau.to/owx/1AXSS00048
• Safety Glasses
• Surface Prep Discs
• Wire Brush http://1aau.to/opw/1AXAA00079

Subscribe:    / @trq  

Check out our playlist:
Acura MDX 2nd Generation 2007-2013:    • Acura MDX 2nd Generation 2007-2013  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.