How to adjust cd70 clutch | How To cd70 bike clutch setting | Classic Honda

Описание: How to repair Honda Cd70 clutch and pressure plates and clutch system
Replacing the clutch plates on your Honda CD70 is a standard maintenance task. This guide explains how the clutch works and the steps to replace it, helping restore smooth gear shifts and power delivery.

Understanding the CD70 Clutch System

The clutch is a pack of alternating plates housed in the engine crankcase. When you pull the lever, the clutch lifter mechanism disengages the pack. This stops power transfer to the gearbox, allowing you to change gears. Releasing the lever re-engages the plates. Friction and heat wear them down over time, leading to slippage and poor acceleration.

Key Replacement Parts:

· Friction Plates: These have a high-quality friction material for grip. They are designed to withstand operational heat.
· Steel/Metal Plates: These smooth plates alternate with the friction plates.
· Clutch Lifter: This critical component ensures smooth, precise operation. It's good to inspect it during replacement.

Friction Plate Specifications:

· Core Material: Premium friction material
· Key Design: Heat-resistant for consistent performance
· Typical Weight: Approximately 59.7 grams per plate
· Common OEM Part No.: 22201087010

Replacement Process in Four Phases

Phase 1: Preparation & Access

1. Place the bike on a center stand.
2. Drain the engine oil.
3. Remove the right-side engine cover to expose the clutch assembly.

Phase 2: Clutch Pack Removal

1. Loosen the clutch spring bolts evenly in a criss-cross pattern.
2. Remove the pressure plate.
3. Carefully extract the entire stack of alternating friction and steel plates. Note their order for reassembly.

Phase 3: Inspection & Installation

1. Clean the clutch basket grooves of any debris or burrs.
2. Soak new friction plates in fresh engine oil for 10-15 minutes.
3. Reinstall the plates in their original alternating sequence.
4. Replace the pressure plate and tighten the spring bolts evenly to the specified torque.

Phase 4: Reassembly & Refill

1. Replace the engine cover gasket and reinstall the cover.
2. Refill the engine with the recommended amount and grade of new oil.

After replacement, the clutch should engage smoothly. Allow a short break-in period of gentle riding for the new plates to seat properly.cd 70 clutch adjustment
clutch setting cd70
bike battery repair
bike ka clutch kaise set karen
clutch plate dalne ka tarika
70 bike clutch plate change
bike clutch adjustment
bike clutch plate problem
bike clutch tight kaise kare
clutch lever
clutch mechanism
clutch plate replacement
honda 125 cam garari sound
how to kick start bike
how to replace motorcycle battery
how to start bike without kick
1.    • How to increase millage | How to set Carbu...  
2.    • How to increase fuel mileage | How To set ...  
3.    • How To Install  Piston Ring Cylinder Head ...  
4.    • How to repair Honda CG125 Bike engine | Ho...  
5.    • How to repair Honda CG125 Bike Clutch Cabl...  . .......thanks for watching.
Subscribe Bike Technology channel. Bike Technology Provide excellent value content for bikes. Bike Technology only for bike Technology.