Unboxing VinylGuard® Gloss Vinyl Floor Sealer For LVT Tile, Terrazzo & Rubber - New Formula 2025
Автор: CoverTec Products
Загружено: 2025-09-16
Просмотров: 263
Описание:
#VinylGuard, #VinylGuardGloss, #covertec, #covertecproducts
Unboxing VinylGuard® Gloss Vinyl Floor Sealer For LVT Tile, Terrazzo & Rubber - New Formula 2025
How Can I Make My Vinyl Floor Shiny Again?
There are a few ways of making vinyl floors shine.
1) You can use a wax on acrylic surfaces and burnish or polish up the floor.
2) You can use an inorganic type of sealer. That is, a solution that hardens the vinyl or rubber, and then you burnish it up.
3) You can use our Vinylguard water-based polyurethane sealer.
You simply roll it across the floor surface to apply it.
It dries with a shiny finish. We also have matte and satin finishes, as well as a medium gloss.
CoverTec’s Vinylguard sealer doesn’t need the typical equipment required to apply store-bought sealers.
It doesn’t need to be polished and burnished. And, it will dry naturally with a high shine – or whichever finish you prefer.
Do Vinyl Floors Need To Be Sealed?
Vinyl floors must always be sealed.
A vinyl rubber floor is naturally very porous, and the finish can be easily damaged.
Dirt gets easily trapped in this type of surface. Soon thereafter, it can become unhygienic and deteriorate very quickly.
If you fail to seal this type of floor early on, your ongoing cost of maintenance will increase significantly over the short term.
To minimize costs, you need to put a durable seal across the floor as a protective barrier against contaminants of all kinds.
What Is A Vinyl Floor Sealer?
This product is a sealer you put across the vinyl, terrazzo or rubber surface to protect it from:
Regular wear and tear
Damage
Contamination from dirt, oils, stains and chemicals.
Ultimately, a good sealer will make it easier to maintain and protect your vinyl surfaces for a long time.
What Is VinylGuard Water-Based Polyurethane Floor Sealer?
Vinylguard is a two-part sealer that we use to protect vinyl and rubber flooring.
It’s ideal for surfaces like:
VCT (vinyl composition tile)
LVT (luxury vinyl tile)
Vinyl plank
Urethane floors
Sport facility floors
Etc.
This vinyl floor sealer comes in the following finishes:
High gloss / Gloss
Satin (Medium gloss)
Matte.
It’s designed to be used in areas where you don’t want the pain (manual labor, time or cost) of stripping and waxing floors.
Our consumer and commercial customers find it most useful when they don’t have full-time access to heavy floor maintenance tools like burnishing equipment or polishing and buffing machines.
Typical commercial or retail environments where Vinylguard saves customers massive amounts of time and money are:
Cafeteria floors
Health center floors
Veterinary facility floors
Restaurant floors (front and back).
Any constant traffic areas where vinyl or rubber surfaces are exposed to ongoing water spills, dirt, pet urine or soiling… Vinylguard can protect the floor for 5 to 10 times longer than off-the-shelf brand sealers.
In the home, it’s ideal for use in:
The kitchen floor
The basement
The garage floor.
VCT is very popular for garage floor surfaces, and using Vinylguard is an easy way to protect against chemicals or salts that may drip onto the floor.
What Situations Call For A Product Like Vinylguard?
Typically, we recommend Vinylguard to customers (of any size) who:
Don’t have the heavy equipment needed for ongoing stripping and waxing, or…
Don’t want to invest the time, money and labor required to maintain vinyl and rubber surfaces properly.
Protecting vinyl or rubber surfaces exposed to constant or high traffic is difficult because the floor sustains continuous contamination and staining.
The waxes and chemicals required to maintain the cleanliness and safety of these surfaces are not cheap – especially if you have to buy them every few months.
And repeated renting (or buying) of burnishing equipment or auto scrubbers can cost a small fortune over a few years.
Vinylguard is a very durable sealer that will protect porous vinyl and rubber floors, and drastically cut – or eliminate – the need for stripping and waxing.
What that means is less maintenance costs for:
Heavily used gym and sporting event floors
High traffic restaurant floors
Busy cafeteria floors
Trampled classroom floors
Pet-stained veterinary floors
Constantly soiled animal daycare centers
Heavy foot-trafficked kitchens, basements and home garages
Etc.
Charles Idowu
Technical Director
10821 NW 50th Street Sunrise Fl 33351
Phone: 888-580-0693
Fax: 754-223-2467
Email: [email protected]
https://www.covertecproducts.com
Monday – Friday 8:30am – 4:30pm
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке: