How to Set Up Your Cox Contour 2 TV Client Box: Step-by-Step Guide

Описание: Welcome to our step-by-step guide on setting up your Cox Contour 2 TV Client Box! In this video, we'll walk you through everything you need to know to get your new TV client box up and running smoothly.

Here's what you'll find in your kit and what you'll need for the setup:
1. Coax cable
2. HDMI cord
3. Power cord

Before you begin, ensure your Cox Internet modem is already installed and running. If you have a large Contour box (host), it also needs to be operational before you start this installation.

*Steps Covered in This Video:*
1. *Plug in the Contour Box* - Connect the coax cable to an active cable outlet and the Contour box. Then connect the HDMI cord from the box to your TV, and finally plug in the power cord to an electrical outlet to power it on.
Tip: Use a centrally located cable outlet or the same one where the old device was connected.

2. *Activate the Contour Box* - Turn on your TV and use your original TV remote to select the correct HDMI input. Follow the on-screen instructions and wait a few minutes for the activation to complete.

3. *Set Up Your New Voice Remote* - Follow the on-screen instructions to set up your new Voice remote. Once you see "All Set," press OK.

If you encounter any issues or need further assistance, we're here to help! Make sure to reach out for support or check out other helpful videos on our channel.

Don't forget to like, comment, and subscribe for more helpful guides and tips!

Thank you for watching! Enjoy your enhanced TV experience with Cox Contour 2!
https://manuals.plus/cox/cox-contour-...